To remove the glue from the iron basin, you need to prepare the following materials: iron basin, hot water, waterproof tape and paper towels. The specific operation method is as follows:

1. First, pour some boiling water. First iron the label soft, as shown in the figure.

2. Then quickly tear off the label paper by hand until only glue remains, as shown in the figure.

4, and then find a little waterproof tape, cut a few sections with scissors, be careful not to let the water touch the waterproof glue belt, as shown in the figure.

5. Then dry the water on the residual glue with toilet paper. Be sure to dry it, or the tape will have no effect on the water, as shown below.

6. Then stick a piece of waterproof tape on the residual glue, press the tape hard to make it stick firmly, then lift the tape vertically with both hands, and repeat this action repeatedly until it is stuck, as shown in the figure.

7. Finally, glue the residue on the iron basin.