#report# Introduction The summary report is a review and evaluation of past work, so it must respect objective facts and be based on facts. The following is a compiled project technical summary report, welcome to read!
1. Project technical summary report
I graduated from the Computer Department of Laiwu Mining Workers University in Shandong Province in 20_. In April 20_, he was assigned to the Xinwen Mining Group Exploration Company. In 20_, he was admitted to the Department of Geological Engineering, a correspondence undergraduate course at Tai'an University of Science and Technology, and graduated at the end of 20_.
In the past 8 years of working here, with the help and leadership of the company’s leaders and colleagues, we have worked hard to do our job well in accordance with the job responsibilities and behavioral norms, and conscientiously completed all the tasks assigned by the leaders. , has been greatly improved in terms of ideological awareness and work ability.
Ideologically positive, able to conscientiously implement the party's basic principles and policies, actively study political theory, adhere to the four basic principles, abide by laws and regulations, be dedicated to work, and have a strong sense of responsibility and professionalism. Actively learn professional knowledge, have a correct work attitude, be serious and responsible, and have good ideological and political qualities, ideological quality and professional ethics.
In terms of work attitude and diligence, you love your job, can treat every job correctly and seriously, and can actively look for your own shortcomings and learn and make up for them in a timely manner.
Carry forward the fine traditions of hardship, simplicity, thrift and hard work, and willingness to help others in life. Always be honest, work diligently, unite colleagues, be pragmatic, optimistic and progressive, and always maintain a rigorous and serious attitude. Work attitude and meticulous work style.
In the past four years, I humbly followed my teachers to learn geology. It was they who made me understand the responsibility of being a geotechnical worker. They also laid the foundation for me and allowed me to learn to identify Lithology, dividing strata, geological cataloging, etc., after working independently, I continued to learn and accumulate experience at work, until I was hired as a geological technician by the group company at the end of 20_.
In the past three years as a technician, I have been responsible for the following areas and report preparation: 3 hydrological holes and 2 geological holes in Bin County, Shaanxi Province, 7 geological holes and 1 hydrological hole in Dong'a County, Liaocheng , one main and one auxiliary well at the wellhead inspection hole in Hengshanbao, New Shanghai Temple, Inner Mongolia.
There is one inclined shaft in the new Shanghai Miaofucheng Mine, one main and auxiliary wellhead inspection hole, five geological holes, and five geological holes in Jindouying, Yanggu County, Liaocheng. 1 hydrological hole.
There are 2 geological holes in Jindouying, Yanggu County, Liaocheng County, 2 hydrological holes, 8 geological holes in Dabu Township, Yanggu County, 2 geological holes in Zhangqiu County, and hydrological holes in Jungar Banner, Inner Mongolia 2. Participated in the preparation of regional geological reports for Miao Fucheng Mine and Hengshanbao in Shanghai, and the preparation of regional geological reports for Dabu Township and Jindouying in Yanggu County.
When responsible for these projects, we will also encounter problems of various sizes, especially the pumping conditions of hydrological holes and wellhead inspection holes, and the fault conditions encountered by geological holes. Before pumping water, clean the well until you can see the lines on your palms and there is no sediment in the bottle. One of the problems encountered when pumping water is that the water sometimes becomes more turbid and sandy, especially when pumping water from loose conglomerate sections. I can see the lines on my palms and there is no sediment in the bottle. Why is it pumped? Will this happen again? There are two general reasons. One is that there is still mud on the casing wall. At this time, water pumping equipment must be provided, and an iron brush should be tied to the lower part of the drill pipe to wash and brush. Second, if there is sand, it is because some parts of the conglomerate section are not well cemented. It is normal for sand to come out of the screen tube. The general treatment method is to throw a sand fishing tool under the hole until it is completely fished out. For the above two problems, using this method, the water will not become turbid or sandy when pumping again. In the geological hole coal series section, it is enough to remember the lithology of the roof and floor of each coal seam and the lithological characteristics of the roof of the marker layer. However, when encountering faults, especially faults in the coal series section, now all coal series are cored, and when faults are encountered What's more important is to take it until the core is complete and there are no fracture zones or fault compression or fault breccias. At this time, you have to rely on the lithological characteristics that you usually see to judge which layer you have reached.
Future work plans, through summarizing the work of the past three years, although there have been certain progress and achievements, there are still deficiencies in some aspects, there are no innovative work ideas, and individual work is not perfect enough. .
In the future work, I will work hard to find out the shortcomings in my work so that I can overcome them in future work. At the same time, I also need to read more books, carefully study the regulations and relevant documents, master professional knowledge, and improve my work. ability, strengthen the sense of work responsibility, and do all personal work in a timely manner. Constantly summarize and reflect, constantly push yourself and enrich your energy, improve your own quality and business level to adapt to the development of the times and the enterprise, and progress and grow together with the company.
2. Project technical summary report
2019 is a year of fruitful results. For me personally, 2020 is a year of comprehensive improvement in personal professional skills. In the past year, as a technical cadre with engineering construction experience in the Ludian Engineering Turbine Engineering Department, I participated partially or fully in the technical work of multiple construction teams in the turbine major. It was during this busy and fulfilling year that, under the unique conditions of Ludian Electric Power Engineering Co., Ltd., on the one hand, I tested and further deepened my original engineering and technical knowledge, and on the other hand, I initially built my own system of professional knowledge.
1. Work Overview
The technical work I am personally responsible for throughout the year can be roughly divided into several time periods in terms of the focus of the project's phased construction.
At the beginning of the new year of 2019, since the company's two major engineering projects, Haikou and Baima, were in critical periods of construction, I was the only technical cadre in the entire steam turbine fleet. As a technical cadre of the steam turbine team, I am responsible for executing all technical work of the steam turbine major team. At the same time, the preparation plan for more than 60 sets of construction drawings for all 21 major systems of the steam turbine major is also an extremely important task with a tight time limit, a huge workload, and a huge amount of work.
From the time when other technical cadres entered the site in April to August, my work focus changed. I was mainly responsible for the daily construction technical work of the first and second shifts and the unfinished early stage. construction tasks. The tasks I was responsible for during this period were mainly the installation of steel platforms in the 1st and 2nd turbine rooms, the hoisting and hauling of 3 high-pressure heaters, the installation of traveling track beams and traveling equipment in the circulating water pump room, the installation of circulating water pipelines in the factory and the tasks of the first shift of pipelines. Participated in the installation of high-pressure water supply pipeline for the hydraulic pressure test of No. 1 boiler.
Starting from August, the technical work tasks I held began to be gradually stripped away. The work tasks of the second shift of the pipeline were completely handed over to the technical cadres newly transferred to the site in early September, and the work tasks have been lightened. In October this year, I began to take over the technical task of installing two steam-driven water supply pumps. Faced with the new work tasks, my professional skills accumulation entered a new stage. Until now, my work has mainly focused on the installation of two steam-driven water supply pump units, the installation of temporary pipelines for steam pipeline purging, and the improvement of all steam and water pipeline systems that the pipeline team is responsible for construction.
2. Work summary
In _ years of work, I have never been intimidated when faced with a series of heavy construction tasks and unfamiliar technical work. Regarding the engineering and technical work I am engaged in, I have always held the view that I despise it from a conscious point of view. After all, these jobs have mature construction experience that can be used for reference, and it is the work of many engineering and technical personnel like me. I am doing the same work; but I adopt a prudent attitude in working methods and strategies, because valuable experience can be accumulated and learned from these systematic work practices and work details.
I regard every job assigned to me by the team leader as a valuable opportunity to accumulate personal work experience. The successful completion of work tasks is my work goal, and doing my best to solve construction problems is My work attitude. I participated in every project construction task that I was responsible for, and fully controlled the construction points of unit projects and sub-projects. Take the installation of the steel platform in the turbine room and the installation of circulating water pipes as an example. These two construction tasks are the earliest unit projects carried out by the steam turbine team. During the construction of these two projects, I often rushed between the main workshop and the circulating water pipe trench to go Check the implementation status of project construction key points, and discuss and solve construction difficulties with the construction team leader. It is precisely because I really devoted myself to the construction process that I mastered the span, verticality of steel platform columns, elevation control of steel column node installation, connection quality control, installation quality control of circulating water pipes, etc. Construction points.
Speaking of hardship and fatigue, every employee on the construction site must have a deep understanding of it, and as a team technician, I have a unique taste of it. During the busiest period of project construction, I had to work with nearly 20 construction teams every day. I had to run several times a day from the boiler 61-meter floor to the circulating water pump room. There was only one reason - I was an engineering technician. Due to work needs, despite the high temperature of over 40 degrees in summer, I also discussed and solved the difficulties of circulating water pipe construction under the scorching sun with the construction team leader, and checked the construction quality of the project. Since I entered the construction site this year, I have only taken 5 days off in more than 300 days. The rest of the time, like my colleagues in the steam turbine team, I have been working overtime every day for the smooth commissioning and power generation of the company's first 600MW unit. Be busy and be happy, rain or shine, cold or hot.
As an employee of a modern large enterprise, as an engineering technician in the new era, in addition to enduring hardships and hard work, I am also constantly summarizing and making continuous progress. The conventional construction techniques have long been firmly remembered in my mind. The new problems and difficulties encountered during the construction process are the focus of my summary. During the busiest period of the project, it is impossible to solve all the things on the same day, so I classify these things and deal with them in a planned way. Because my only engineering construction experience before the Luzhou project was the Panzhihua 135MW project, I had insufficient work experience and encountered many problems. For my own shortcomings and mistakes, I have corrected them in time. As for the established facts, the method I adopt is to deal with them correctly, analyze the reasons from my own shortcomings and mistakes, sum up experience and lessons, Make it your own wealth.
In addition to technical work, I also hold positions in the General Youth League Branch of the Engineering Project Department and the Installation Youth League Branch. I am also the Qing'an Post Chief of the Steam Turbine Team. Participating in youth activities has always been my hobby. I actively participated in every activity of the Youth League Committee and performed my duties well in the activities of the Youth League Committee. In terms of youth activities, my regret is that due to busy work, I was unable to carry out more activities for the young workers of the steam turbine team as originally planned. The propaganda task of the steam turbine construction site in _ year was not completed well. This is The failure of my project.
3. Summary
I have always adhered to this philosophical saying - Heaven moves vigorously, and a gentleman will strive for self-improvement. I have always set the standard for an outstanding engineering and technical personnel. Myself, I myself have also improved due to this requirement. The company's glory requires our efforts to create, and personal development requires our own hard work to achieve. For these lofty goals, I have been working tirelessly and hard. In the future work, I will continue to guard against arrogance and impetuosity, work hard, work closely with everyone in the big family of the company, use my brilliant youth to realize the take-off of the company, and write my own life with blood without regrets. Chapter.
3. Project technical summary report
First of all, let me introduce the situation of Yantai Wanhua Engineering Project. The Yantai Wanhua Engineering Project Department is located in Lingang Chemical Industry, Yantai Economic and Technological Development Zone In the park, electrical installation mainly includes three parts: power, lighting, and grounding. The power distribution room includes installation of transformers, voltage panel cabinets, cable laying, calibration wiring, and debugging work. The construction unit is Yantai Wanhua Polyurethane Co., Ltd., the supervision units are Beijing Huaxia Petrochemical Engineering Supervision Co., Ltd., Shandong Qilu Petrochemical Engineering Co., Ltd., and the design units are Hualu Engineering Technology Co., Ltd., Shandong Qilu Petrochemical Engineering Co., Ltd., and Shanghai Haicheng Design institute. Company 10 has undertaken two sets of main equipment areas in the Yantai Wanhua Project Department, namely the gasification unit area and the propane dehydrogenation unit area. The gasification unit area has 32 main items and the propane dehydrogenation unit There are 33 main projects in the district ***, and the construction volume of the electrical instrumentation major is quite large. Among them, 18 main projects have been started in the gasification unit area, and 8 main projects have been started in the propane dehydrogenation unit area. The main work of our office in the early stage is drawings. Review, preparation of construction plans and start-up reports, submission of materials, on-site lightning protection grounding, electrical lighting, power, fire alarm concealed piping, and inspection of materials and engineering documents.
The Yantai Wanhua project is different from other projects. When I first came to the project department, I was completely uncomfortable with it. Its management model introduced the DuPont management model, which set higher standards for ourselves and the entire team. requirements. As we continue to understand Wanhua's corporate management system, we have gradually adapted to its corporate management model. This also requires us to be more strict with ourselves. I will think in advance of the work that needs to be done in the next week and do it in advance. Be prepared and do a good job in technical briefings, insist on going to the site at least once a day to understand the actual situation on site, and be aware of it. The Wanhua project materials budget submission adopts an online process. First, submit the newspaper board material budget. After submitting the online electronic board material budget, and after the budget is approved, you can then submit the demand plan. The required materials need to be searched for the corresponding material codes in the material library of the OA platform. Since there are many and miscellaneous materials in electrical professional construction ( There are many materials that are not in the material library, and we need to repeatedly communicate with the owner, design and purchasing departments) This has brought us a lot of trouble, so I established a material coding library myself and coded the materials of commonly used materials. Establishing a ledger greatly saves time and improves work efficiency.
Now I am responsible for the technical quality work of the entire construction site. The two installation areas are far apart, and I have to oversee two project departments, two supervision units and three design units respectively. It was a bit too much, so I made a three-day work plan every day, wrote down my daily work on paper, and did each thing one by one. After completing each thing, I deleted one item on the paper. This improved work efficiency. Avoid scratching your beard and eyebrows.
The 20_ year is coming to an end soon. I feel that I still have a lot of shortcomings. There are many things that I still need to continue to learn. I feel that I can learn a lot of new things every day when I study on site. At the same time, I also hope that the company can organize more training classes, mainly based on the actual situation on site. We should try our best to emphasize theory over practice, and tell everyone the good construction methods on the project and issues to pay attention to on site, and try our best to Make every job of our instrument and electronics a highlight. If we do not do our job well enough, we also hope that the company’s leaders will give us more criticism and advice. We will also conscientiously complete every task assigned to us by the leaders. ,20_I will work hard!
4. Project technical summary report
20_ is an important turning point in my life journey. After leaving school and entering the society, my life has a new starting point, a new beginning and a new goal. Lanshan Tunhe New Materials Co., Ltd. gave me a practical opportunity to apply theory into practice. During this period of my work, my colleagues took great care of me and always gave me encouragement and help. Below I summarize the work of the past few months as follows:
1. Work Harvests
In the past few months, as a quality inspector, I have carefully studied the company’s quality management and control processes according to job responsibilities. The requirements mainly include the following points:
1. When sampling and storing raw and auxiliary materials, I strictly follow the company's management requirements to ensure that no more is missed and more is taken. Learn the physical and chemical properties of various raw materials and auxiliary materials for proper storage.
2. Sample inspection Inspection work is a delicate inspection process. "Details determine success or failure." During the experiment, I conducted every experiment with a rigorous work attitude. At present, I have mastered the testing methods and procedures for all raw and auxiliary materials. I want to thank my master and my colleagues for teaching me this.
3. Data processing When recording data, I recorded, summarized and reported each experimental data based on the principle of "pragmatism and truth-seeking". Make sure there are no false reports or false reports.
2. Thoughts and experiences
1. Attitude determines that all work must be meticulous and careful. You can't make mistakes all the time. When necessary, check the results of your work to make sure that your work is foolproof. After work, we must often summarize work lessons, continuously improve work efficiency, and summarize work experience. Although I will make some mistakes at work and be criticized by my leaders, I don’t think this is a shameful thing because I think these mistakes and criticisms can allow me to avoid similar mistakes in future work and make me more effective at work. Grow up quickly. During the time I was working with everyone, their rigorous and serious work style left a deep impression on me. I also learned a lot from them that I lacked.
2. Be diligent in thinking about the daily work of the position, which is cumbersome and boring after a few days. This requires us to be diligent in thinking about improving working methods, improving work efficiency and reducing working hours.
3. Continuous learning must constantly enrich my professional knowledge and skills. This will make my work more convenient.
To make a difference in one's position, one must be familiar with the professional knowledge of the position and broaden one's knowledge through continuous learning. I was like a blank piece of paper when I first entered the company. There was not a word on it, but now the paper is neatly filled with handwriting. Leaving the school unit is my second classroom. Work is another way of learning. After several months of studying in the laboratory, I have now reached the working level of a full-time employee.
3. Own shortcomings
1. Occasionally, work errors are caused by sloppiness at work, which brings unnecessary trouble to the work. In the future, I will complete my job carefully with a rigorous work attitude.
2. Not proactive enough in dealing with others due to personality reasons. In order to complete my work more perfectly in the future, I will take the initiative to communicate more with my leaders and colleagues. I hope to learn from them knowledge that cannot be learned in textbooks through conversations.
Since I stepped out of school and stepped into this historical stage, I first felt that this society was very strange. Whether it was work or interpersonal relationships, everything was difficult for me as a fledgling. These few months of baptism have really made me grow a lot.
The end of 20_ years. The arrival of 20_ years is both the beginning and the end. What appears in front of me is a fertile land for myself to ride on. I also clearly feel the heavy responsibility. I will continue to do so in my future work and life. Learn, practice, and constantly improve myself to live up to the opportunity given to me by Lanshan Tunhe and the cultivation given to me by my leaders and colleagues. I will grow together with Lanshan Tunhe...
5. Project Technical Summary Report< /p>
In 20__, according to the overall project planning of the group and its subsidiaries, as of December, with the joint efforts of relevant personnel of the company, the company had completed 9 new products and 1 technical transformation project successfully applied for 9 patents and obtained 24 authorizations, and passed the application for county-level patent demonstration enterprises, municipal-level technology research and development centers, and provincial innovation pilot enterprises, as well as municipal-level patent demonstration enterprises, provincial trademarks, provincial products, and municipal enterprise technology centers. review, and won the second prize of the county-level Science and Technology Progress Award, the municipal-level Top 100 Science and Technology Enterprises and other honors. At the same time, in order to further improve product quality, each subsidiary actively carries out product research and development and optimization of production processes. The company has successfully completed the company's technical transformation, scientific research projects and development tasks required for internal production. Compared with previous years, it has made great progress and achieved gratifying results. In order to do a better job in 20__, the summary is as follows:
1. Technical transformation project:
1. At the beginning of 20__, an additional 8 million yuan was added according to the project establishment It is planned to invest more than 15.7 million yuan in the technical transformation project of automotive filters. The subsidiary has set up a project team. In March, with the cooperation of the technical department and other relevant departments, it fully mobilized the enthusiasm of technical personnel to With the goal of low investment and advanced technology, through investigation, research and demonstration of domestic and foreign special equipment, we have completed the development, installation and commissioning of 51 sets of equipment, of which 16 sets of equipment were independently developed and 14 have been put into production. 35 sets of conventional equipment were manufactured and processed, with a total equipment investment of more than 10 million yuan. Among them, the large-scale web rolling machine and image thread detection machine have also applied for a number of invention patents. Eight sets of production equipment were purchased and renovated, and an oil filter and air filter production line were added respectively. Among them, the large air filter has been officially produced since October 2014, and now it has been able to produce nearly 40 types of heavy-duty air filter elements. The production is basically on the right track. The degree of automation of the equipment invested is relatively higher than the level of the same industry, the production capacity has been greatly improved, the labor intensity of operators has been greatly reduced, and the investment funds have also been greatly saved. The technical transformation project achieved its expected goals.
2. Yingtan __ Company has completed the installation and commissioning of most of the main equipment this year, and has transformed some equipment. We have compiled the job responsibilities, operating procedures, and analytical operating procedures for raw materials, intermediates, elements, and products for each position, and conducted induction and safety training for personnel in each position. Equipped with various necessary instruments for the laboratory.
In terms of process, after many repeated demonstrations and investigations on the debugging of each process of the wet method and the fire method, A zinc immersion and zinc A were used for the process route of the flash drying system and the secondary oxidation of raw materials. The zinc content is high in chlorine, the raw material after washing has high chlorine content, and the washing water contains high chlorine. The activated carbon treatment method cannot meet the expected nanometer and high purity requirements; it is proposed that the chlorine content of the raw material before entering the leaching process should be less than 1.0%. Under the premise, the caustic soda process is used to recover sodium chloride and sodium sulfate at one time, and a sodium salt recovery device is added. Currently, sodium salt recovery equipment is being negotiated with suppliers.
3. Since the establishment of the project of industrialization of 80,000 industrial robots and key parts, the project has been delayed repeatedly due to the delay in securing land. At present, the land for the project has basically been secured, and the factory drawings have entered the design stage.
2. Scientific research projects
1. The subsidiary’s new product research and development projects are undertaken by the technology department. Since this year, 9 new automotive filter products have been completed, 6 of which are New products approved by government departments (2 from the Economic and Information Bureau and 4 from the Science and Technology Bureau) passed the provincial new product appraisal in December and are expected to receive a government subsidy of 120,000 yuan. The research and development of three new products independently initiated have also been completed, and all performances have reached the predetermined targets. At the same time, "UC-5899 Multifunctional Composite Diesel Filter" won the second prize of the county-level scientific and technological progress award in 20__.
In order to reserve technology, the subsidiary organized a research and development team to develop 11 new products, covering filtration and separation products for automobiles, environment, cigarettes, and equipment, among which PA end cap 07 series engine oil Six products including filters, screw air compressor oil and gas separator oil separator, CNG low pressure filter assembly, crankcase oil and gas separator, Tenneco urea filter, and air purifier filter three nets have been designed. ; An integrated fiberglass tube has been developed in cooperation with South China University of Technology. South China University of Technology has trial-produced samples, and the company is testing the performance of the samples. The design of the armrest box air purifier was completed using 3D technology and put into market promotion.
At the same time, the technical department has produced about 500 conventional samples and developed more than 10 new products for the main engine factory. Among them, Hangfa’s marine filter assembly (machine filter and diesel filter) has filled the sub- A blank field for the company's product type. The Yangchai VM project was tracked and verified as a key project, and the overall project progressed smoothly.
2. The "Articulated Robot for Assembly" reported in the name of the group is a major county-level science and technology project in 20__. Since the project was established by the Municipal Science and Technology Bureau in 20__, the research and development work has been stagnant due to lack of technical strength. Not long ago, after the company's Robot Automation Division was established this year, the research and development of the project was restarted and reported to the County Science and Technology Bureau to delay the completion time. The design of some drawings of the four-axis robot has been completed and is expected to be completed in September 20__.
3. In September 20__, the subsidiary reported the 20__ county-level major science and technology project "Engine Oil Lubrication Module System". The total investment in the project is expected to be 2 million yuan, and the economic benefits are expected to reach 15 million yuan, creating a tax profit of 2.7 million yuan. At present, the project has been reviewed and publicized by experts from the Science and Technology Bureau. The project will be formally confirmed after an on-site inspection of the company before February 20__. If the project is approved, the Municipal Science and Technology Bureau will have 20 to Financial subsidy of 500,000 yuan.
4. The subsidiary also applies to the relevant government departments for provincial-level enterprise technology centers, county-level patent demonstration enterprises, municipal-level enterprise technology research and development centers, provincial-level innovative pilot enterprises, and municipal-level high-skilled talent innovation Studio and three municipal-level cultivation demonstration enterprises. Among them, the county-level patent demonstration enterprise and the municipal-level high-skilled talent innovation studio have been approved, and the provincial-level innovative pilot enterprise has passed the expert review of the Provincial Department of Science and Technology and is expected to be approved after completing the work. The provincial enterprise technology center should consult the intermediary for poor guidance and lack of understanding of the review experts, resulting in failure in the on-site defense and failure to pass.
At the same time, the municipal enterprise technology center received excellent evaluation in 20__. There are 150 municipal-level companies, of which 27 are outstanding, and 2 companies at the county level have been awarded excellent, and their subsidiaries are one of them. And successfully applied for the municipal enterprise technology research and development center.
In addition, the subsidiary also passed the review of provincial brand products and provincial trademarks, and received an online technology auction reward of 45,000 yuan; and was rated as the top 100 municipal science and technology enterprises in 20__.
5. Environmental Technology Company is committed to upgrading decontamination agents. Repeated tests were conducted on T30 using domestic raw materials to replace imported raw materials, and the performance is basically the same as that of imported raw materials. Tire care brightener and wax care agent were experimentally developed, and the test results were basically consistent with American samples; the research and development of detergent product project started in September. So far, the function and color have basically reached the effect of the Itali "rooster head" sample. The fragrance and stability of this product are under experimental development.
However, the "T30" product was developed to replace the phosphating solution. Repeated tests were conducted with different concentrations, different humidity, and different formulas, but the effect was not ideal; the "7.3" gel type test was conducted with 5 different raw materials. After many experiments, the effect was not satisfactory and the expected effect was not achieved; a leather care agent was experimentally developed, but the effect was worse than the American sample. We are now looking for raw materials to improve it.
6. Yingtan__ Company’s three provincial-level key new product declarations passed the review; repeated demonstrations of the zinc A process were finally rejected, and the process conditions of the one-time system were adopted. For this purpose, the one-time system The optimization of process conditions and the two schemes of sodium salt recovery in the primary system (alcohol recovery and direct recovery) have been verified in the laboratory, and both can achieve the expected results. Compared with the two processes, the direct recovery of raw materials consumes less, requires less equipment investment, and improves productivity. The zinc oxide produced meets the product requirements of high-purity zinc oxide (≥99.9%) and meets the requirements of food-grade sodium sulfate.
3. Patented inventions
The subsidiary applied for 9 invention patents in 20__, of which 7 passed the preliminary examination and substantive examination. From 20__ to 20__ Obtained 24 authorizations. Received patent subsidy of RMB 37,800.
IV. Summary of awards
1. Awards and subsidies received
2. Unreceived rewards and subsidies completed and reported in 20__
p>
5. Problems
1. The mobility of technical personnel is high, resulting in no continuity in project development and construction.
2. The project management process is not smooth and job responsibilities are not clear, which makes the boundaries of the work scope uncertain and the work efficiency is low.
3. Ineffective reward and punishment measures for project construction have affected the enthusiasm of technical personnel to a certain extent. It is common to underestimate the difficulties of the project and be unfamiliar with the processing technology, which leads to multiple modifications during the design and production processes, resulting in a waste of raw materials and labor; at the same time, there are irregularities in the design drawings that result in a waste of materials and labor, and delays. Project progress.