Car logos cannot be removed. The "Technical Conditions for Safety in Motor Vehicle Operation" stipulates that there must be a permanently maintained trademark or factory logo in front of the vehicle body that is compatible with the vehicle brand.

According to the "Technical Conditions for Safety of Motor Vehicle Operations":

4.1.1 Motor vehicles should be equipped with at least one permanent, easily visible part on the outer surface of the front body of the vehicle body. A trademark or factory logo appropriate to the vehicle brand. ?

4.1.2 Motor vehicles should be equipped with at least one product sign that can be permanently maintained. The fixation, position and type of the sign should comply with the provisions of GB/T18411; if the product sign is marked with a label, the label It should comply with the general performance, anti-tampering performance and anti-counterfeiting performance requirements of labels specified in GB/T25978. Modified vehicles should have both the modified vehicle product label and the pre-modified vehicle (or chassis) product label.

Extended information

The "Regulations on Procedures for Handling Road Traffic Safety Violations" stipulates:

Article 29 If any of the following circumstances occurs, the person shall be detained in accordance with the law Motor vehicle driving license:

(1) Driving a motor vehicle after drinking alcohol;

(2) Handing over a motor vehicle without obtaining a motor vehicle driving license or having a revoked motor vehicle driving license , Driving by a person who has been temporarily detained;

(3) Driving a motor vehicle exceeding 50% of the prescribed speed;

(4) Driving a person who is suspected of being assembled or reaching scrap standards Driving a motor vehicle on the road;

(5) Accumulating points reaches 12 points in one scoring period.

Beijing Municipal Public Security Bureau Public Security Traffic Management Bureau-Motor Vehicle Operation Safety Technical Conditions