Model text of brick factory sales contract 1
Party A:
Party B:
1. Product name, trademark, model, quantity and delivery time:
Second, the payment method and time limit:
Three, quality requirements and technical standards:
According to the current national standards and the requirements of technical and quality supervision departments.
Four. Place and method of delivery:
If Party B delivers it directly to Party A's construction site, Party A shall notify Party B of the required quantity within days.
Verb (abbreviation of verb) acceptance criteria, methods and time limit for raising objections;
Party B shall cooperate with Party A to randomly check the quantity at any time, and the deviation of each vehicle shall not be greater than 15. Check the number, impose a fine of 5 times the excess. The quantity shall be subject to the signature of the consignee and the shipper after acceptance. Party B shall obey the command of Party A's on-site management personnel, and the bricks shall be placed in the designated place. After each arrival, the goods must be accepted by the on-site consignee before unloading.
Liability for breach of contract of intransitive verbs:
Only when Party B's delay in delivery affects Party A's construction period, Party A has the right to terminate the contract and pay a penalty of RMB 5,000 (written basis). If Party A fails to perform the liability for breach of contract according to this contract, it shall pay a penalty of RMB 5,000 only.
Seven. Ways to resolve contract disputes:
The two sides negotiated. If negotiation fails, the case shall be arbitrated by the court in the place where the contract is signed.
Eight. Matters not covered in this contract shall be settled by both parties through consultation. This sales contract is made in duplicate and will come into effect after being signed by both parties.
Party A (representative): Party B:
Tel: Tel:
Bank of deposit:
Account number:
Signing time: year month day
Model essay on brick factory sales contract II
Product sales contract
Contract number:
Address of contract signing:
Party A (demander):
Party B (supplier):
According to the Contract Law of People's Republic of China (PRC), the Product Quality Law and other relevant laws and regulations, Party A and Party B voluntarily sign this contract through friendly negotiation for mutual compliance.
1, product name, model specification, unit, quantity and price
Serial Number Product Name Model Specification Unit Quantity Unit Price Subtotal (RMB)
(Yuan) Note
1
Total contract amount (RMB) in words: in figures:
2, product delivery method and time
2. 1 Delivery time: After this contract comes into effect, Party B shall send the contract products to Party A before.
2.2 Party B will deliver the contract products to Party A at the delivery place.
2.3 Mode of transportation: □ Express delivery □ Railway □ Air □ Local delivery □ Other.
3. Payment method and time limit
Party A pays the contract price by the following payment methods:
1. Cash: Party A paid all the contract money by payment on, 2000;
2. Deferred check: Party A pays the full amount in the form of deferred check, and the payment date is;
3. Deferred payment: Party A shall pay all the contract money within the day after receiving the goods provided by Party B;
4. After receiving the payment from Party A, Party B shall issue a sales invoice to Party A. ..
4. Ownership
If Party A fails to fulfill the payment obligations within the payment period agreed in this contract, the property rights of the goods shall be owned by Party B, and Party B shall have the right to take back the goods or demand Party A to pay all the payment and bear the liability for breach of contract. Party A shall bear the economic losses caused to Party B due to breach of contract, including but not limited to payment of liquidated damages, goods recovery fees, expected profits and other related expenses brought to Party B after the full performance of this contract.
5, acceptance period and method
5. 1 Party A shall organize the acceptance of all goods within 2 days after receiving the goods. If the goods are not questioned to Party B in writing or by fax within 2 days after arrival, it shall be deemed as qualified.
5.2 Product acceptance standard: the product shall be accepted according to the factory standard requirements of the original product and the technical parameters of the contract.
6, quality assurance and after-sales service
6. 1 The product quality standard shall be implemented according to the manufacturer's ex-factory standard.
6.2 Provide product manufacturer's standard service and warranty, provide free telephone technical support and consultation, and provide various paid services at the same time.
6.3 Other service agreements:
7. Liability for breach of contract and dispute settlement
7. 1 If Party B fails to deliver the goods in time due to the manufacturer, transportation delay, transportation loss or force majeure, it shall explain to Party A, and Party A shall not claim the liability for breach of contract from Party B on this ground. If there is no explanation, if the delivery is delayed for more than 3 days, Party A shall be compensated 0. 1% of the unpaid part of the payment; if the delivery is delayed for more than 15 days, Party A and Party B may terminate the contract through negotiation or continue to perform the supply obligations, but they shall pay Party A1%of the unpaid part of the payment; Without the above problems, Party A cannot return the goods for any reason.
7.2 If Party A delays payment by 1-5 days, the liquidated damages shall be calculated at 0. 1% of the delayed payment amount every day; If it exceeds 5 days, the liquidated damages shall be calculated as 0.3% of the late payment amount.
7.3 Once the supply and demand contract is signed, the party unilaterally terminating the contract shall pay the other party 20% of the contract amount as compensation.
7.4 If Party A refuses to accept the goods in violation of the contract, or returns the goods midway after the contract comes into effect, it shall pay Party B a penalty of 20% of the return amount.
7.5 Any dispute arising from the execution of this contract shall be settled by both parties through negotiation or mediated by Changzhou Administration for Industry and Commerce. If negotiation or mediation fails, a lawsuit can be brought to the people's court according to law, and both parties agree to accept the jurisdiction of the people's court where Party B is located.
8. Force majeure and risk transfer
8. 1 If either party fails to perform the contract due to force majeure (war, fire, flood, typhoon, earthquake or force majeure events), it shall notify the other party of the reasons for its failure or incomplete performance within 24 hours, and provide the other party with the proof materials provided by the competent department for its failure to perform the contract within 7 days. In case of force majeure, delay, partial performance or non-performance of the contract are allowed, and the liability for breach of contract may be partially or completely exempted according to the actual situation.
8.2 In this contract, force majeure refers to unforeseeable, unavoidable and insurmountable objective circumstances.
8.3 The risk of the goods shall be transferred to Party A after Party A signs for it.
9. Supplementary clauses and others
9. 1 If there are matters not covered in this contract, both parties shall make supplementary provisions through consultation, which shall have the same effect as this contract.
9.2 In order to shorten the order cycle, the buyer can conclude the contract by fax. The fax shall be stamped with the official seal of the company and signed by the legal representative or entrusted agent. When the supplier seals the fax and sends it to the buyer, the contract is established. The fax and its copy shall be regarded as the original and have the same legal effect.
9.3 The signatory of this contract has the right to represent Party A and guarantee the performance of this contract. If the person cannot represent Party A due to Party A's needs, Party A shall immediately notify Party B in writing, and Party A shall bear the losses or expenses caused to Party B due to Party A's failure to notify Party B in time.
9.4 This contract is made in duplicate, one for each party, and shall come into effect after being signed and stamped by the legal representatives or entrusted agents of both parties.
9.5 Other matters that need to be explained:
Seal of Party A (Buyer): Seal of Party B (Supplier):
Legal representative (entrusted agent): Legal representative (entrusted agent)
Tel: Tel:
Fax Phone: Fax Phone:
Contact address: contact address:
Date of signature: year month date of signature: year month day.
Model essay on brick factory sales contract 3
Party A's (Seller's) ID number: contact address:
Party B (Buyer) ID number: contact address:
There is Wentaxi Brick Factory (Lida Brick Factory in Shule County, Xinjiang Uygur Autonomous Region) in Village 4 on the east side of Yamanya Township Power Station Farm, and Party A resells the bricks to Party B. According to the Contract Law of People's Republic of China (PRC) and relevant laws and regulations, both parties to this contract have reached the following agreement on the basis of equality, voluntariness and friendly negotiation.
1. The infrastructure of this brick factory includes: 32 kiln seats that can be used normally, a set of 450 brick machines, including a set of motors, a set of 200 KVA power supply transformers, including 350 meters of lines, 40 houses and complete sets of transportation tools. The land area of brick factory is 100 mu.
According to the negotiation between both parties, the total amount of the brick factory is 2 million yuan.
Three. Party A shall ensure that all documents related to the brick factory are complete and change all documents related to the brick factory to Party B's name.
Four. Party A shall ensure that the ownership of the brick factory is clear and uncontroversial. If the contract cannot be fully performed due to unclear ownership of the brick factory, and the fault liability occurs during the performance of the contract, which causes great losses to Party B's production, Party A shall bear it.
5. After Party A completes all relevant formalities of the brick factory and changes all relevant documents of the brick factory to Party B's name, Party B will pay Party A 6.5438 yuan+500,000 yuan first, and Party B will pay Party A 50,000 yuan every month during the production period until the final payment of 500,000 yuan is paid.
6. After Party B pays 6,543,800+500,000 yuan to Party A, the ownership of the brick factory shall belong to Party B. If the brick factory is occupied by the state or enterprises, all compensation shall belong to Party B. ..
7. Before Party B takes over the brick factory, all creditor's rights and civil disputes arising from the ownership of the brick factory have nothing to do with Party B, and Party A and its third party shall not bring arbitration or litigation against Party B on this ground.
8. Before the brick factory was handed over to Party B in June, 20_ (10), disputes such as creditor's rights, debts, personal injuries and property losses occurred in the brick factory have nothing to do with Party B. Party A shall bear corresponding legal responsibilities, and Party B may claim compensation from Party A according to this agreement.
Nine. If Party B's production is disturbed or damaged due to the reasons in Article 7 and Article 8 during the performance of the Sales Contract after it came into effect on October 201year 10, the legal consequences arising therefrom shall be borne by Party A, that is, Party A shall bear all direct and indirect losses suffered by Party B's property and person. If Party B stops production or delays production for the above reasons, Party A shall compensate Party B for the economic loss of 20_ 0 yuan per day.
X this contract is notarized by the notary office and comes into effect as of the date of signing.
XI。 This contract is made in duplicate, one for each party.
Party A: Party B:
Year, month, sun, moon, sun.
Brick factory sales contract model article 3 related articles:
★ Sales Contract of Demonstration Brick Factory (2)
★ Red Brick Sales Contract Template (2)
★ Red Brick Purchase Contract Template
★ 5 copies of model factory sales contract.
★ Complete works of sales contract model essays
★ 3 latest steel sales contract templates in 2020.
★ A Complete Collection of Model Sales Contracts
★ Model labor contract of brick factory
★ Model text of seedling sales contract 3 Latest 2020
★ 3 latest commercial housing sales contracts.