NR3 10 is a hardened and wear-resistant floor material produced by Beijing Jiangda Leibo Building Decoration Co., Ltd., and the formula is owned by the manufacturer. NR3 10 is a basic product model, and it is a nonmetallic wear-resistant aggregate ground hardener. It is suitable for light-load places, such as pedestrians, bicycles, trolleys and other places where non-motor vehicles slightly rub, with a thickness of about 2mm and a material of 4-5kg. If vehicles are used or friction is frequent, such as underground garages, warehouses, workshops, roads, etc. The thickness of wear-resistant layer must be increased to about 5mm, and the material consumption is 10- 12kg. NR3 10-C products should be used, otherwise the bottom will wear out in less than one year, which will affect the service life of the ground. If it is a heavy-duty and frequently-rubbed industrial workshop floor and workshop, it is necessary to use metal aggregate materials, and increase the thickness of the wear-resistant layer, about 8-20mm, and the material dosage is 15-40kg. NR3 10-J products should be used. If the place of use has aesthetic requirements, colored materials can be used and polished and refined to produce the effect of marble luster. Because the curing agent NR3 10 of Beijing Jiangda Leibo Building Decoration Co., Ltd. is a well-known product for many years, there are many cases of counterfeiting NR3 10 in society. Please identify the registered trademark of "Jiangda Leibo" when purchasing and purchase directly from the manufacturer. The telephone number 0 10-6557822 1 is available in the market. The formula of fake nr3 10 hardener is completely different from the genuine one, and it can't play a role in wear resistance at all. Please pay attention when buying.