The following methods can be adopted:

1. Soak the towel with warm water (hot water is used in winter), and wipe it twice at the adhesive mark, then soap it with warm and wet towel, and wipe it several times at the mark, and finally wipe off the soap foam with a clean warm and wet towel.

2. You can easily and thoroughly remove these stickers by using alcohol, gasoline or nail polish diluent stored at home.

3. Use adhesive remover. The remover can be sprayed on the surface of the glue, which has a fresh fragrance, and the ideal effect can be achieved by spraying it gently.

4. soak the adhesive part in hot water or blow it with a hair dryer, and then gently rub the adhesive part with a wet cloth to remove it.

Extended information

Method of removing viscose

Alcohol is used. Dip enough 95% alcohol with a soft cloth, and then gently wipe the adhesive, the adhesive will become soft and detached easily, and alcohol will generally not damage the surface of plastic parts or car paint.

However, it is sometimes found that alcohol is not very effective for some stickers. This can be done by dipping a soft cloth with a little gasoline to gently wipe the stickers. At this time, it should be noted that gasoline has a "dissolving" effect on certain plastics or paints, so it must be used carefully: either wipe it lightly in an unimportant place first, and use it if there is no problem; But be careful not to use too much gasoline, and at the same time try to be short.

generally speaking, wiping the car body surface with gasoline for a short time has no obvious effect on the car body surface paint film. In this way, the adhesive can be easily removed.

use essential balm. Apply some wind oil essence to the left mark and wipe it, which is more useful.

use scotch tape. Stick it off with scotch tape, leaving no trace.

use glue remover. A bottle of glue remover is only more than 2 yuan, which can be used in many places and takes a long time.

Reference: Baidu Encyclopedia-scotch tape.