A pattern-making system that is easy to operate and highly scalable: the pattern-making system is combined with laser cutting. There is no need to output cardboard patterns. The linked modification of the pattern structure can be achieved by modifying only a few key data. It also has the function of imaging left and right shoe patterns, and can cut left and right foot patterns at the same time. Automatic typesetting function reduces scrap.
The fabric laser cutting machine is a fully automatic feeding and automatic rolling cutting machine specially developed for the plush fabric manufacturing industry. It completely replaces the ancient electric ironing process. There is no smoke when working, which saves materials. There is no burnt edge on the cutting edge, no lint is lost during cutting, and the work is environmentally friendly and pollution-free. Hardware features of the special cutting and blanking machine for plush toy fabrics:
1. Taiwan Shangyin linear motion guide rails are selected to ensure that the laser head operates smoothly, at high speed, and without jitter. It has the characteristics of small slit, fast speed and high precision, and the accuracy and service life of the equipment are guaranteed.
2. Software automatic typesetting function. After the cutting pattern is designed, the software automatically layouts the material and the pattern closely to reduce waste.
3. Equipped with metal molybdenum reflective lenses and gallium arsenide focusing lenses imported from Singapore, which are resistant to sassafras and high temperature. They do not need to be replaced frequently, reducing the cost of use. The light spots are delicate and the light output is uniform.
4. The advanced speed change system enables the laser to instantly change speed and self-adjust the speed according to the needs of curves and straight lines during the cutting process, making the cutting edges smooth and the corners curved naturally.
5. The fully enclosed water tank ensures that the water circulating in the laser tube is dust-free and clean, extending the service life of the laser tube and effectively reducing production costs.
Recommended instructions for special models for plush toys:
JQ1810 toy fabric two-head reciprocating laser cutting machine adopts a crawler-type working platform, dual-laser head reciprocal processing and automatic discharge system Combined, the cutting speed is fast, the fabric utilization rate is high, and it can be equipped with an automatic feeding system to achieve continuous feeding and cutting, which is especially suitable for cutting plush materials, composite fabrics and other materials. 100W glass tube sealing CO2 laser, 1800mm×1000mm crawler working platform, accuracy ±0.01mm, can be equipped with automatic feeding. Type CO2 sealing laser
Laser output power 100W
Cutting Format 1800mm×1000mm
Cutting speed 0-36000mm/min
Motion system safety alarm system, offline control system, stepper transmission
Power supply AC220V± 5%/50HZ
Supports graphic formats AI, BMP, PLT, DXF, DST, etc., and can be connected to most clothing CAD technology design output
Applicable materials: all kinds of fabrics, leather, Plush fabric, plexiglass, plastic, PVC, paper, wood, bamboo, rubber, resin, ceramics, granite and other non-metals.
Industry uses: shoe sample processing and cutting, shoe material hollowing and engraving; clothing patch embroidery, woven labels, trademark cutting, clothing accessories engraving, punching, and trimming; leather punching, lofting, and cutting ; Cutting of plexiglass, plastic, fiberboard, PVC, paper, wood and bamboo, etc.; Carving of wood and bamboo, ceramics, granite, and shadow carving industries. The operating process of the laser cutting machine
The operating process of the laser cutting machine must be paid attention to during production, otherwise it is easy to cause accidents. In particular, enterprises should pay attention to only operating the laser cutting machine in a standardized way, and make everyone Operators must follow this process to maintain safe production and maintain the laser cutting machine.
1. Follow general cutting machine safety operating procedures. Start the laser strictly according to the laser start-up procedure.
2. Operators must undergo training, be familiar with the structure and performance of the equipment, and master relevant knowledge about the operating system.
3. Wear labor protection equipment in accordance with regulations, and wear protective glasses that comply with regulations when near the laser beam.
4. Do not process a material before knowing whether it can be irradiated or heated with a laser to avoid the potential danger of fumes and vapors.
5. When the equipment is in operation, operators are not allowed to leave their posts without authorization or leave the equipment to others to take care of them. If they really need to leave, they should stop the equipment or cut off the power switch.
6. Keep the fire extinguisher within easy reach; turn off the laser or shutter when not processing; do not place paper, cloth or other flammable materials near the unprotected laser beam.
7. When an abnormality is discovered during processing, the machine should be stopped immediately and the fault should be eliminated or reported to the supervisor in a timely manner.
8. Keep the laser, machine bed, and surrounding areas clean, orderly, and free of oil stains, and workpieces, plates, and waste materials should be stacked according to regulations.
9. When using gas bottles, avoid crushing the welding wires to avoid leakage accidents. The use and transportation of gas cylinders should comply with the gas cylinder supervision regulations. Do not expose the cylinder to the sun or near a heat source. When opening the bottle valve, the operator must stand on the side of the bottle mouth.
10. Observe high voltage safety regulations when servicing. Every 40 hours of operation or maintenance every week, every 1,000 hours of operation or every six months, maintenance must be carried out in accordance with regulations and procedures.
11. After starting up, you should manually start the machine tool in the X and Y directions at low speed, and check to see if there are any abnormalities.
12. After inputting the new workpiece program, it should be trial run and its operation should be checked.
13. When working, pay attention to the operation of the machine tool to avoid the cutting machine going out of the effective stroke range or the two machines colliding and causing an accident.