The steps for transporting optical cables on a fixed pallet with wooden shafts are as follows:

1. Make sure the surface of the pallet is flat and clean, without any debris or obstacles.

2. Place all optical cable wooden reels on the pallet, making sure to leave a certain gap between adjacent wooden reels to facilitate fixing the bandage.

3. Use a bandage to fix the optical cable wooden shaft disk on the pallet. Wrap the bandage around the wooden spindle disk starting from the bottom of the pallet, covering both ends of the diameter of the wooden spindle disk. Be careful to tighten the bandage, not too tight to avoid compressing the optical cable.

4. Clamps and strapping ropes can be used to reinforce the bandage to ensure that the optical cable wooden spool is firmly fixed on the pallet.

5. Check whether the fixation is firm and reliable, and properly mark the transportation documents, including the type, quantity, receipt notification and other information of the optical cable.

6. Before transportation, check the fixation of all optical cable wooden shaft disks again to ensure safety. During transportation, try to avoid collisions and vibrations to protect the optical cable from damage.