The latest models are WD10G220E21 or E23.

Loading operation (transportation engineering method) The operation of pouring sand, rocks, ores and other materials into trucks, trucks, and containers can be carried out using high-efficiency methods. The handling engineering method should be determined according to the conditions on site. There are mainly engineering methods matching the loader and transport vehicle and loading and handling engineering methods using only tire loaders. ?

According to the conditions of the work site, the loading and handling engineering method can be selected with a short cycle time (one loading time). The above method uses a tire loader to continuously shovel, transport and dump. It is usually suitable for transport distances of about 30 to 100m.

Extended information:

Precautions for the use of loaders:

1. The loader should be parked in a higher and flatter location and be careful to avoid obstructions. For traffic, if it is necessary to park on a slope, the bucket should be pointed downhill and blocks should be placed on the front and rear tires to prevent the car from walking.

2. Before stopping the loader at the end of the work, the transmission lever should be placed in the neutral position, the bucket should be laid flat, and the engine should be idle for at least 3-5 minutes to allow the engine to cool down gradually and evenly. Come down.

3. After the engine is turned off, the loader should pull the large and small arm joysticks forward and backward to relieve the pressure of the hydraulic system and place the joystick in the middle position, then tighten the handbrake and turn off the main power supply.

4. In order to reduce the formation of water vapor in the fuel tank, please fill the fuel tank in time after the work is completed (the air inside the fuel tank will form water vapor after being cooled at night and adhere to the inner wall of the fuel tank. , this is the main reason why there is water inside the fuel tank).

5. Before leaving the cab, the user should reconfirm whether the gear position and operating lever are in neutral and neutral, and whether the handbrake is tightened, and then pull out the switch key and lock it. doors and windows.

Baidu Encyclopedia-Loader

Baidu Encyclopedia-Shandong Lingong Engineering Machinery Co., Ltd.