Putty powder is also a decoration material that must be used in our decoration. There are many brands of putty powder, among which Meichao water-resistant putty is what many friends will choose when decorating. For Meichao water-resistant putty You are also very curious about putty. Meichao water-resistant putty has many good advantages. It is also good to learn more about Meichao water-resistant putty. Next, let’s get to know each other with the editor’s introduction. So, what are the advantages of Meichao water-resistant putty?
What are the advantages of Meichao water-resistant putty?
Mechao water-resistant putty powder is easier to use. You don’t need to add glue, just add water. Yes, the waterproof performance is very good. The base layer should be solid, clean, roughly flat, and free of exposed water. The strength of the base layer should be greater than or close to the strength of putty.
How to distinguish the authenticity of Meichao water-resistant putty
Observe whether the outer packaging of the product is printed with the registered trademark of Meichao. The registered trademark of Meichao Company is "Mechao", such as In the past, "Zhenmeichao" and "Meizhan" were all fake products.
Observe whether there is a national code anti-counterfeiting mark on the outer packaging of the product. All products of Meichao Company are enabled for national code counterfeiting detection, and you can use the code checking system to check for counterfeiting. The specific method is as follows: Scratch off the gray coating under the certificate, and you will see two lines of 4 groups of 20 numbers. Use the phone to dial 010-64802566 or 8008303315 to check the authenticity. After you answer the phone, you can hear the voice. Tip: "The National Anti-Counterfeiting Data Center will identify the authenticity for you. Please use a dual-tone phone to enter the anti-counterfeiting number on the product, ending with #"; enter 20 consecutive anti-counterfeiting numbers in order from left to right and top to bottom. Press the # key again.
How to use Meichao putty powder interior wall lining
Stirring: The amount of water added is based on the construction consistency. After stirring evenly, leave it for 10 minutes, stir again, and then use it. .
Surface treatment: The surface of the wall should be solid and free of floating dust and dirt, and the moisture content of the wall surface should be less than 5%. Putty matching: If the wall surface is smooth or is a new building material, such as gypsum partition board, polystyrene board, paper-faced gypsum board, etc., an interface agent must be used for interface treatment.
Scraping and leveling: Putty leveling should be completed in a semi-dry state (light pressure by hand without deformation). After curing, it can be leveled with emery cloth. Product standard, JG/T298-2010(Y) Construction temperature: above 5℃, and the curing process temperature is not lower than 0℃. Storage and transportation: Store in a cool and dry place. The shelf life is 6 months. The product is non-toxic and non-flammable, and storage and transportation can be handled in accordance with the "Non-Dangerous Goods Regulations".
Through the detailed introduction above, I believe everyone is already familiar with Meichao water-resistant putty. Meichao putty powder is very easy to use and very convenient to use. No need to add glue, and The quality of Meichao water-resistant putty is very good, and it is safe and guaranteed to use, so it has always been highly sought after by consumers. Through the detailed introduction above, I believe everyone is already familiar with Meichao water-resistant putty. I hope my introduction can help readers.