Current location - Trademark Inquiry Complete Network - Trademark registration - Simple steel contract
Simple steel contract

With the general improvement of people's legal awareness, there are more and more interest disputes about contracts. Signing a contract can clarify the rights and obligations of both parties. So how is the general contract drafted? The following is a simple steel contract template (selected 5 pieces) compiled by me. Welcome to read and collect it. Simple steel contract 1

buyer: _ _ _ _ _ _ (hereinafter referred to as Party A)

supplier: _ _ _ _ _ _ hereinafter referred to as Party B)

In accordance with the Contract Law of the People's Republic of China, the Product Quality Law of the People's Republic of China and relevant laws and regulations, we shall abide by equality and equality.

article 1: product name, manufacturer, specifications and quantity: (subject to party a's plan)

(1) product name: steel (specific specifications and quantities are subject to party a's purchase plan)

(2) manufacturer: large and medium-sized steel mills with national production licenses. The manufacturers agreed in this contract are Xianggang, Lianyuan Steel and Pinggang.

(3) Product variety: wire rod, round steel, rebar, coiled screw, etc. The unit price of steel products beyond the scope of this agreement, such as angle steel, I-beam, channel steel, steel plate, etc., shall be confirmed by the sales confirmation sheet made by both parties after negotiation.

(4) quantity: 17, tons tentatively, subject to the actual receipt of goods by Party A..

(5) Contract amount: 86 million yuan tentatively, subject to the actual settlement amount.

article 2: quality standards:

the quality of products supplied by party b must meet the national standards: round steel conforms to the standard of GB1499.l-28 (including round and straight bars) and rebar conforms to the standard of GB1499.2-27. The negative tolerance of the supplied products must reach the national allowable range. In case of any disagreement between the two parties on the product quality, the test result of the provincial quality inspection agency where Party A's construction site is located shall prevail. If the test result is unqualified, Party B shall bear the test expenses and all other related economic losses caused to Party A; if it is qualified, Party A shall bear the test expenses. Party B shall be responsible for the quality of the products supplied for life.

Article 3: Agreement on confirmation of contract settlement unit price:

(1) Basic settlement price: The price of wire rod, rebar, round steel and snail of the same grade shall be taken as the basic settlement price on the day when Party A receives the goods.

① On the basis of the above-mentioned settlement base price, rebar will be added with 12 yuan (including delivery fee, loading fee and transportation fee) per ton, plus the discount fee per ton converted from six months' advance, and the sum of the above three items will be taken as the settlement unit price (namely: settlement base price+(delivery fee, loading fee and transportation fee) 12 yuan+discount fee per ton converted from six months = comprehensive settlement unit price).

② On the basis of the above-mentioned settlement base price, 13 yuan (including delivery fee, loading fee and transportation fee) is added to each ton of snails and wires, and the discount fee per ton converted from six months' advance is added. The sum of the above three items is regarded as the settlement unit price (namely: settlement base price+(delivery fee, loading fee and transportation fee) 13 yuan+discount fee per ton converted from six months = comprehensive settlement unit price). The settlement unit price is all expenses incurred when the goods arrive at Party A's site, including delivery fee, loading and unloading fee, transportation fee, valid tax invoice, discount fee, etc., and Party B shall not charge any other expenses from Party A.. Party B shall be responsible for unloading on site, and Party A shall actively arrange unloading within a reasonable time after the goods arrive at the site.

(2) If two quotations appear on the Internet within one day on the day of receipt, the average price of the two quotations will be taken as the settlement base price. When the goods arrive on Saturday, Monday or a legal holiday and the price is not published online, the online price starting from this Friday or a legal holiday is used as the settlement base price.

article 4: submission and supply of plans

(1) party a shall provide party b with the estimated monthly material demand plan for next month before the end of each month for party b to confirm the supply of goods. In order to facilitate the mobilization arrangement, Party A shall provide Party B with the mobilization plan of this batch of goods two days before the materials are mobilized, which includes the required steel varieties, specifications, sizes, quantities and mobilization time.

(2) Party B shall organize the mobilization according to the time limit, specifications, quantity and cut-to-length required by Party A's plan to ensure the supply.

article 5: delivery place and acceptance method of materials purchased under this contract:

(1) specific delivery place: the point designated by party a at the site.

(2) Acceptance method:

① The rebar and round steel are delivered in bundles of 9 meters and 12 meters.

(2) The manufacturer's material certificate and factory certificate label shall be attached with the goods according to the batch. Before use, Party A shall be sampled and rechecked by the personnel designated by Party A and Party B and the on-site supervisor. If the quality is unqualified, Party B shall unconditionally return the goods and be responsible for all the expenses of returning the goods, and bear all the economic losses caused to Party A from this.

⑨ rebar and straight round steel shall be checked and accepted by Party A and Party B according to the theoretical weight (three digits shall be reserved after the decimal point, and the fourth digit after the decimal point shall be rounded off).

④ The round plate and snail shall be weighed and accepted at any weighing place selected by Party A and Party B..

⑤ both parties shall check and accept the geometric dimensions and theoretical weight of the product on the spot, and the error must be within the range specified by the national standard.

⑥ after the acceptance, the on-site receiving personnel and project materials personnel designated by Party A shall issue the site receipt (voucher) specified by Party A, and both parties shall handle the settlement with this receipt. This order does not exempt the goods supplied by Party B from any responsibility for nonconformity.

Article 6: Discount fees, payment methods and settlement procedures are as follows:

1. Discount fees:

In this contract, Party B agrees to advance the capital for six months, and the discount fee for six months shall be borne by Party A at the rate of 3.15%. If the benchmark loan interest rate issued by the central bank fluctuates greatly in the same period, both parties will sign a supplementary agreement to adjust it.

2. Payment method:

(1) Party B advances for six months, and Party A shall pay Party B the settled payment for the first month before the end of the seventh month from the settlement date of both parties, and so on.

(2) Payment method: cash check or telegraphic transfer.

(3) When paying the payment, all payment bills should be made out to the head of Guangdong Huasha Trading Co., Ltd. or remitted to the bank designated by Party B: _ _ _ _ _ _ _ _ _ _.

III. Settlement procedure:

(1) The 25th of each month is the settlement date of both parties. At each settlement, Party B shall first provide Party A with a product sales confirmation sheet for that month, and at the same time provide a receipt signed by the on-site designated person of Party A for Party A's review.

(2), after the verification by both parties is correct, handle the monthly (general) purchase contract settlement sheet, which shall be signed by the authorized person designated by Party A as the basis for invoicing and settlement.

(3) After settlement, Party B shall provide Party A with the same amount of legal and valid tax invoices (Party B shall bear all the responsibilities for the economic losses and reputation impact caused to Party A due to invoice problems).

article 7: liability for breach of contract

(1) the quality of the goods supplied by party b must conform to the current national quality acceptance specifications and inspection standards, otherwise all relevant losses and responsibilities caused to party a due to the quality problems of the goods shall be borne by party b. Party A must check before using it. If Party A uses it without testing, it has nothing to do with Party B, and Party A shall bear all responsibilities. If the steel supplied by Party B is unqualified, Party B shall arrive at the site within 8 hours after receiving the notice, and guarantee to replace the qualified goods within 24 hours. The freight and hoisting expenses shall be borne by Party B..

(2) Party B shall guarantee the supply according to the time limit, specifications, quantity and length required by Party A's plan. If the construction period of Party A is affected due to Party B's untimely supply or the quality problems of the goods supplied and the incomplete supply of each batch, Party B shall take full responsibility for the economic losses and reputation impact caused to Party A; Compared with the time limit specified in Party A's plan, if Party B delays the supply, Party B will bear a penalty of RMB 5, for each day exceeding (except for force majeure factors).

(3) during the execution of this contract, if the supply of Party B is not timely or the normal supply cannot be guaranteed due to any other factors such as quality and service, under this condition, Party A has the right to terminate the contract and choose other suppliers to continue the supply, and the settlement and payment method is still implemented according to this contract. If Party A fails to pay the payment for goods to Party B as agreed in this contract, Party B has the right to terminate the supply, and all economic losses shall be borne by Party A.. Party A shall pay the interest on the payable goods at twice the bank loan interest rate for the same period.

article 8: safety matters

party b shall abide by the relevant safety management regulations of the state and party a on the construction site, and the personnel entering the site shall wear safety helmets and other protective appliances as required, and shall not enter the construction area unrelated to party b's work without authorization. in case of any safety accident of the personnel entering the site, all responsibilities and all economic losses caused shall be borne by party b.

article 9: contract disputes:

in case of any dispute during the performance of this contract, both parties shall settle it on the principle of friendly negotiation. if negotiation fails, either party has the right to bring a lawsuit to the people's court with jurisdiction where the project is located.

article 1: other

(1) the contract is made in quintuplicate, with party a holding three copies and party b holding two copies.

(2) The contract shall come into effect after both parties affix their official seals or special seals for the contract. After the contract comes into effect, Party B will send full-time personnel to provide relevant services for the project during the supply period.

(3) Article 3 will automatically become invalid after the payment for the goods under this contract is completed; However, the conditions and terms of responsibility for the quality of the agreed materials and the corresponding terms of after-sales service will still take effect.

(4) If there are matters not covered in this contract, both parties can make changes and supplements through negotiation, otherwise, any unilateral modification of the clauses by either party will be deemed invalid.

(5), contract period: after the expiration of the supply period, the payment will be paid off.

party a: _ _ _ _ _ party b: _ _ _ _

party a's representative: _ _ _ _ party b's representative: ______

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _. Based on the principle of equality, mutual benefit and reciprocity, Party A and Party B have reached the following agreement on Party B's purchase of steel from Party A:

1. Product name, trademark, specification, model, manufacturer, quantity, amount, etc.

The above prices are non-invoiced. If Party B asks for an invoice, the unit price will be another Canadian dollar per ton. Party a shall settle the account with the receipt

2. Quality requirements and technical standards: the steel supplied by Party A must meet the quality standards stipulated by the state, and a quality guarantee (material label, inspection certificate, etc.) of the goods of the current batch shall be issued with the goods.

third, the measurement method of steel: the wire is calculated according to the actual weight; Thread gauge, adjusted according to national standards.

iv. delivery time: delivered before 24: on _ _ _ _ _ _ _ _ _ _ _ _ _ _.

5. Place and method of delivery: Party A shall deliver the goods to the place designated by Party B, and Party A shall bear the related expenses such as transportation, loading and unloading.

VI. Acceptance criteria and methods: After Party A delivers the goods to the place designated by Party B within the specified time, Party B shall take samples and deliver them to the local legal inspection department for national quality standard inspection within 48 hours (excluding legal holidays) from the date when Party A delivers the steel

. If the steel is found to be unqualified after testing, Party A shall promptly return the batch of steel and supply qualified products within 24 hours, and the expenses arising therefrom shall be borne by Party A..

VII. Settlement and payment method:

1. The material receipt signed by the consignee designated by Party B shall be taken as the settlement basis. The person-in-charge appointed by Party B is the material receiver:

2. Payment method: all the payment shall be paid within one week after passing the inspection and acceptance.

VIII. Liability for breach of contract:

1. If the steel provided by Party A is unqualified and it is not replaced in time, Party A shall pay Party B a penalty of .3% of the corresponding payment for this batch of unqualified steel for each overdue day.

2. if party b fails to make payment as agreed in the contract, party a has the right to terminate the contract and start to collect liquidated damages from party b at the rate of three thousandths of the amount owed per day.

IX. Dispute resolution:

If there is a dispute in the contract, both parties shall settle it through negotiation; If negotiation fails, the case may be brought to the people's court in the place where the contract is performed.

X. Other agreed matters:

None

XI. This contract is made in quadruplicate, with Party A holding one copy and Party B holding three copies, which shall come into effect after being signed and sealed by both parties.

entrusted agent of party a: _ _ _ _ _ entrusted agent of party b: _ _ _ _ _

ID number of agent: _ _ _ _ _ ID number of agent: ______

Tel: _ _ _ _ _ _ _ _ _ On _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The following agreements have been reached through friendly negotiation between Party A and Party B on the specific matters of steel supply for the 1st, 4th and 5th floors of the new resettlement housing project for shantytown renovation of I2 plot in the central area of Shouyang County:

1. Requirements of steel manufacturers:

Both parties agree that the steel products recognized by Changgang, Haixin and Dedication shall be subject to national standards. If Party A needs other brands of steel products, Party B shall supply them on time and in quantity, and the price is the same as Article 3.

2. Total supply:

The total steel demand (supply) of this project is about 2__ tons.

III. Supply price of steel:

According to the brand of steel supplied, the price of steel net will increase by RMB _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

iv. delivery time:

party a needs to provide a specific dosage plan for each batch three days in advance. according to the demand plan provided by party a, party b must deliver the goods to the construction site within two days.

V. Settlement method and time limit:

The total supply of the project is about _ _ _ _ _ _ tons.

1. steel settlement method:

when each batch of steel is delivered to the construction site, the factory certificate of this batch of steel must be provided to party a with the vehicle. Party A shall actively send people to receive materials and issue a material receipt in time, and Party B shall issue a corresponding receipt to Party A for each payment, which shall be used as settlement evidence.

2. Payment method:

About 5 tons of steel are needed for the project below plus or minus zero, and Party B needs to make an advance payment of 1 million steel. When Party B enters the site, Party A needs to pay Party B 5, yuan.