The main part of the sawing machine has a base; Bed and column; Saw beam and transmission mechanism; Guide device; Workpiece clamping; Tension device; Feeding rack; Hydraulic transmission system; Electrical control system; Lubrication and cooling system.
basis
The base is a box structure welded by steel plates, and the lathe bed and columns are fixed on the base. There is a large space in the inner cavity of the base. The front left side is the electric button control box, the right side is the distribution board box, and the middle is the hydraulic oil tank welded with steel plates. The cavity is equipped with a hydraulic pump station and a hydraulic pipeline, and the right side is a cooling cutting fluid tank and a water pump.
(body of) lathe bed
The bed is cast iron and fixed on the base. The column consists of a big column and a small column. As the guide rail of the saw frame, the large column supports the up-and-down movement of the saw beam to ensure accurate guidance. The small column plays an auxiliary role, thus ensuring the normal cutting of the saw blade. The middle is a clamping vise and a manual feeding mechanism. The front of the vice is connected with a workbench for receiving finished products. The clamping device on the left is that the clamping screw passes through the inner hole of the hydraulic clamping cylinder rod, and the left jaw moves left and right by turning the handwheel or pressing the button. Usage: mainly used for blanking in mechanical and forging processing.