The method is as follows:

1. First, tear off the self-adhesive decorations affixed to the glass or product surface, soak the towel with warm water (hot water should be used in winter), and Repeatedly wipe the traces of the sticker twice; then apply soap on a warm and wet towel, and wipe the traces several times; finally, wipe off the soap suds with a clean warm and wet towel, and the traces of the sticker will be removed.

2. Apply toothpaste evenly on the surface of the sticker, leave it there for a while, and then wipe it with a soft rag. Sometimes there is more sticker and it is stronger, and it is not removed at one time. Apply toothpaste on the traces and use the same method to remove the headache-inducing sticker. The principle is that toothpaste contains glycerin, which is a good solvent and can dissolve the components of the sticker. In addition, many cosmetics also contain glycerin. Can also be used to remove stickers.

3. Scrape with a pen, paper and knife, suitable for hard surfaces such as glass and floor tiles; wipe with alcohol, suitable for glass, floor tiles, clothing, etc.; freeze, the sticker will harden after freezing. It can be torn off directly, suitable for methods such as alcohol and scratching that are not suitable.

4. Fengyoujing. If it is a self-adhesive sticker, you can use a hair dryer to heat it up and remove it easily, but it is not suitable for plastic, as overheated plastic will deform.

5. Use a hairdryer to blow hot. It can be applied to stickers on glass, plastic, wood, or metal. First, use a hair dryer to blow hot air back and forth a few times, then tear off a small side, and slowly tear it along the tearing direction while blowing hot with a hair dryer. The effect is very good. .