GB 10343-2002 Edible Alcohol AmendmentNo. 1
Gb/t10781.1-2006 Luzhou-flavor liquor
GB/T 1078 1.2-2006 Fen-flavor Liquor
GB/T 1078 1.3-2006 Daoxiang White Spray
GB/T 14867-2007 Fengxiang wine
GB/T 16289-2007 maotai-flavor liquor
GB/T2082 1-2007 Liquor by Liquid Method
GB/T20822-2007 Liquor by solid-liquid method
GB/T20823-2007 special flavor liquor
GB/T20824-2007 sesame-flavor liquor
GB/T20825-2007 Laobai Dry-flavor Liquor
QB/T2524-200 1 Maotai-flavor white
What is the difference between national standard, trademark and enterprise standard? The main difference is that the scope and effectiveness of the requirements are different because of the different institutions that formulate and promulgate them.
The national standard is generally mandatory, promulgated by the state, and all manufacturers must meet GB or GB/T(T stands for recommendation, otherwise it is mandatory).
Industry standards are generally formulated by the Ministry and industry associations, and the mandatory requirements within the scope of application are: standards of the Ministry of Electric Power.
DL or DL/T
Enterprise standards are formulated and implemented by enterprises themselves according to national standards and industry standards, and must meet or exceed the requirements of national standards and enterprise standards.
The difference between trademark and enterprise standard A trademark is the symbol of a product, and an enterprise standard is the symbol of a production enterprise (the foundry will not mark it). Typical is Procter & Gamble, which is an enterprise standard, but it is not obvious in goods; Rejoice, Head & Shoulders and Pan Ting are trademarks, which are the main identification marks of products.
Generally speaking, it is better to have both. Trademarks should be attractive and express the quality of products; Corporate logo is more formal, representing corporate image, and is used in formal occasions.
The difference between national standard and non-national standard of smart lock is 1. Every country has different standards. No matter how many ways to unlock, the international standard smart lock must have the key unlocking function.
2. The difference between international standards and non-standards mainly lies in the requirements for lock body and lock core, such as the distance from handle to lock core, the length and width of pinch plate, the length and width of lock body, etc. , according to the door opening mode and door thickness. The United States mostly uses wooden doors, and China mostly uses security doors.
3. The international and non-standard differences between smart locks and mechanical locks are similar, but several unlocking methods are added on the basis of mechanical locks.
How to identify the national standard enterprise standard JS Different standards have different naming methods, and GB or GB/T stands for the national standard. Enterprise standards don't matter, as long as the naming method doesn't conflict with some recognized standards. There are also industry standards and local standards.
The difference between the old and new national standards. People who make books also need to eat. You see, the current standards can't wait to change every year. Let's buy some new standard books every year. It cost a lot of money, but something changed their standards, and it was similar. So what is practical now is often old things.
The difference between national standard and non-standard aluminum-plastic board lies in the official requirements, indicators and parameters of this kind of products.
Once the buyers and sellers have negotiated, the national standard is the criterion for both parties.
Non-national standards are very arbitrary.
For example, the aluminum-plastic panel for curtain wall specified by the national standard means that the panel thickness is above 4 mm, the aluminum thickness is 0.50 mm, the surface is made of 70% fluorocarbon resin, and the process of three coating and three baking is implemented, and the film thickness is above 25 microns.
Much larger than the national standard.
The difference between national standard and non-standard steel pipes is suggested to consult steel traders.
Compared with ordinary steel pipes, seamless steel pipes bear more pressure. Therefore, in industrial production, seamless steel pipes are generally used for pipelines that need to bear greater pressure. Some people call it a "small blood vessel in industry", which is needed to make airplanes, ships, trains, transport oil, natural gas and water.
The difference between non-standard argon bottles and national standards is that non-standard argon bottles are products that are not manufactured according to national standards. For example, the wall thickness of gas cylinders is clearly defined in national standards, but sometimes thinner ones are used and sold in the market, which are non-standard products.
The national standards for gas cylinders are as follows:
Periodic inspection and evaluation of GB/T 13075-20 16 steel welded gas cylinders
GB 15382-2009 general technical requirements for gas cylinder valves.
Gb15383-2011connection type and size of gas cylinder valve outlet.
Gb/t15384-2011naming method for gas cylinders.
Gb/t15385-2011test method for hydraulic explosion of gas cylinders.
GB/T 332 15-20 16 gas cylinder safety pressure relief device
GB 5099- 1994 Seamless Steel Gas Cylinder
Gb 5100-2011welded steel gas cylinder.
Gb/t 9251-2011hydrostatic test method for gas cylinders.
GB/T 9252-20 17 gas cylinder pressure cycle test method
The difference between national standard and non-standard national standard valves, as the name implies, are valves manufactured according to national standards.
There are two kinds of non-standard valves: first, the valve manufacturing requirements conflict with the standards and are not manufactured according to the standards. The second kind of non-standard valves refers to some types of valves, and the size of these valves can be any size that customers want. These valves are generally welded, and the materials are cut according to the customer's size requirements, and then welded. These valves also have industry standards, but this standard basically does not restrict products. I see. Read it.
There are two kinds of non-standard valves: first, the valve manufacturing requirements conflict with the standards and are not manufactured according to the standards. Second, non-standard valves refer to some types of valves. The size of these valves can be any size that customers want. These valves are generally welded, and the materials are cut according to the customer's size requirements, and then welded. These valves also have industry standards, but this standard basically does not restrict products.