The fishing rod is one of the indispensable weapons for fishing. The quality of the fishing rod directly affects the fishing process. How to choose a fishing rod has become a topic that most fishing enthusiasts often talk about. In view of this, I have collected some information on how to choose a fishing rod on the Internet for your reference. At the same time, I would like to say that when choosing a fishing rod, do not blindly pursue high prices. What suits you is the most suitable!
How to choose a fishing rod
First of all, check whether the outer paint surface of the rod is smooth, whether there are bulging bubbles, or uneven spots left by impurities on the paint surface. You can feel it with your hands. Then check whether the rod mouth of each section is neat and whether the wall thickness is uniform. What needs to be noted is to look before and after.
After looking at the appearance, pull out each section of the pole, and then insert the pole into the next section in the opposite direction. For example, if a pole counts six sections from the tip backward, then Just insert the rod tip of the first section into the second section in the opposite direction. Check how long the rod tip is left outside the rod mouth. It should be at least 2 centimeters. Do this in sequence. Insert the second section into the third section in the opposite direction. Festival. This method is used to check the overlap amount of the inner connection of the fishing rod. The overlap amount should normally be between 2.5 cm and 5 cm.
After checking the overlapping amount of the pole, assemble the pole, pull out all the poles section by section, and then gently shake the pole to see if there is any strange sound. If so, It means that there is a gap in a certain interface part and the overlap is not tight. After checking which section it is, connect it tightly and shake it gently again. If this phenomenon still occurs, you can't buy it no matter how low the price is. Because this kind of rod increases your chances of breaking the rod and breaking the line and running away with fish. While checking the integrity of the fishing rod, we should also pay attention to which part of the rod starts to bend when it is shaken slightly, so that we can know why the rod is in tune.
Put the fully unfolded pole on one finger and slowly adjust it until the pole is in a balanced state. Then the point where your finger is holding the pole is the point of focus of the pole. The closer the point is to the direction of the pole tip, then most of the gravity of the pole will be towards the front. The normal pole focusing point should not exceed the first section. Finally, remember to ask the owner of the fishing tackle shop whether the rod has the original fittings and other questions about after-sales service. After everything is clarified, you can buy it
2. How to choose a fishing rod
A well-made and beautiful fishing rod will not only allow you to enjoy the pleasure of fishing but also It is fun, can reduce physical exertion and ensure the quantity and weight of catches, so how to choose a fishing rod has become a crucial issue for beginners. Every fishing rod has its own applicability and specificity. Beginners should choose a fishing rod based on many factors at the beginning of their purchase.
How to choose a handy and satisfying fishing rod, I think we should consider the following aspects: first, what kind of fish is being fished, whether it is crucian carp or carp; second, the method of fishing The nature, whether it is recreational fishing or competitive fishing; the third is the material of the fishing rod, whether it is glass fiber or carbon fiber; the fourth is the tonality of the fishing rod, whether it is 28 to 37 or 46; the fifth is the length of the fishing rod, It also includes whether to use long-section poles or short-section poles; sixthly, family income status, etc.
Key points to consider when choosing a fishing rod: The first step is to check the appearance. Check whether the text and pattern on the rod body are clear and distinct: whether it is a "three-no" product; whether there is ISO-9000 quality certification text; the second step is to hold the fishing rod under the armpits, pull it out from the smallest details, and inspect it section by section. Check whether there are cracks and scratches, and whether there are gaps between the running-in joints; the third step is to check whether the rod body is straight, shake it a few times with your hands, and feel whether there is a "clicking" sound. If there is such a sound, It means that the rod mouth is not well ground; the fourth step is to open the leakage cover at the last end of the rod body, check both ends of each section to see the smoothness of the inner wall, and see whether the rod wall of each section is even; the sixth step is to finally check the adjustment of the fishing rod. sex and whether it meets the requirements for fishing.
I hope that beginners, on the basis of grasping the key points, will also shop around and buy a genuine and satisfactory fishing rod for themselves.
3. How to choose a fishing rod
When buying a fishing rod, you generally need to check where the manufacturer is. Many counterfeit products are marked as being produced in Japan and South Korea, and they are cheap. You should be careful. Genuine fishing rods are often marked with the name of the manufacturer or the trademark on the rod box. Most of the trademarks have Chinese descriptions. Do not assume that they are imported products just by looking at the exquisite packaging and foreign characters.
The dead weight of a fishing rod is the weight after removing the front and rear plugs and the handle. Many manufacturers mark the dead weight of the fishing rod very low for the sake of sales, so don’t just look at the label on the package and ignore the real weight of the fishing rod. weight. Low dead weight does not mean that the fishing rod must be made of high-carbon carbon cloth. In order to pursue high profits, some manufacturers use inferior carbon cloth to make fishing rods, or make the rod wall thinner and the length different. In this way, The cost is saved and the product feels light to hold, and the packaging is better to confuse fishing friends. There is no guarantee at all about the strength of such a fishing rod.
The carbon cloth used in fishing rods is generally divided into high carbon, medium carbon, low carbon and carbon leather rods. Some manufacturers use the percentage of carbon content marked on the fishing rod to mislead us. In fact, in addition to high carbon content, many really good rods are also wrapped with reinforcing wire to increase the strength of the fishing rod. The reinforcement wires on many defective products are drawn, which can be seen from the back opening. The fishing rod with a hollow rod tip feels better than a solid rod tip, but the solid rod tip has an advantage in hardness and strength, so you should choose according to your actual requirements when purchasing. Fishing friends who catch large fish in reservoirs are best to choose fishing rods with increased wall thickness, while beginners should choose fishing rods with moderate hardness, which can not only control fish well, but also feel more comfortable and the price is moderate.
Generally speaking, the prices of products from regular manufacturers are slightly higher than those from small manufacturers, but their production equipment is advanced, their quality and after-sales service are relatively reliable, and the sources of raw materials used are also guaranteed, so it is still recommended. You choose fishing gear from regular manufacturers.
Four. How to choose a fishing rod
First, from the appearance of the fishing rod, due to the current advancement of science and technology, the coating is quite gorgeous. Fishing friends only need to choose their own. Just the style you like.
Second, hold the handle and feel whether it is comfortable to hold the pole? For a good fishing rod, the handle is a very important part. After pulling out the fishing rod (be sure to pull out each section carefully) check the arc and curvature of the fishing rod. A good fishing rod must have a smooth arc. This is the key that fishing rod designers attach most importance to. There should be no "corners" between each section, otherwise, this is where the fishing rod will break
Pick up the fishing rod and stir it a few times. If the angle of each section of the fishing rod is If the tightness is not enough, it will make a sound when stirred. This kind of fishing rod will easily break when catching a big fish. If these parts meet the requirements of a good fishing rod, you can put away each section of the fishing rod and open the screw cap of the rod head. At this time, you can see each section of the rod. You need to carefully look at whether the rod wall thickness of each section is average. With good rod-making technology and good materials, you can definitely produce fishing rods with the same rod wall thickness.
5 How to choose a fishing rod
(1) Check the coloring of the surface of the rod body. ?
1. The color of the fishing rod depends on the consumer's preference, but it is better to apply transparent original paint. Because the transparent paint has good hardness, it is not easy to peel off and the defects of the material are easy to see. Other colors are better. Apply primer. If the primer is too thick, it will increase the weight of the fishing rod and affect the coordination of the fishing rod. Moreover, the surface color of the primer will easily peel off.
2. Check whether there is any color difference in the coloring of each section of the fishing rod, so as not to affect the appearance.
3. Check whether there are bubbles or impurities in the surface coating. If there are bubbles or impurities, the fishing rod will easily break.
(2) Check the durability of the fishing rod. 1. Pull out each section of the pole. For the first few sections that are thinner, grasp both ends of the pole with both hands to bend the pole. If the curvature of the pole is uneven, or the bending point is in the second half of the section, the pole will easily break. The thicker sections are not easy to bend, so you can use both hands to properly press the pole. If the pole wall is too soft or there is a tearing sound, the pole will also break easily. Generally, consumers check the fishing rod by pulling it out and then bending it. This method is incorrect and not detailed enough.
2. Check the cuts at both ends of the pole. The thinner end of the pole is easy to crack when catching fish, so check its strength and whether the cuts are neat. The rod wall at the thicker end should not be too thick. If it is too thick, it will increase the weight of the entire fishing rod, and it will not be easy to connect each section tightly, which will affect the performance of the entire rod.
(3) Check the various accessories of the fishing rod. 1. Is the end of the first section fixed?
2. Whether the front plug and rear cover are easily broken or loose.
3. Check whether the guide ring and reel seat are cracked or loose.
4. Whether the anti-slip paint on the handle will peel off and whether the nylon thread is wound tightly.
Six How to Choose a Fishing Rod
Fishing Rod Purchasing Tips: Any excellent fishing rod must be used in a suitable purpose so that the characteristics of the fishing rod can be fully exerted. When purchasing a fishing rod, in addition to knowing "what kind of fish I want to catch and how big the fish is," the author also recommends readers to read the description of the fishing rod packaging box in detail, from which you can get a lot of what you want to know. The applicable scope of fishing rods and tools has been explained. I briefly introduced some basic factors for selecting hand rods. I hope it will be helpful to the readers.
Each fishing rod has its applicability and target fish. When purchasing a fishing rod, fishing friends must consider their usual fishing methods, fish species, and fish size. When choosing a fishing rod, of course economic factors must also be taken into consideration. The following author specifically introduces the key points in selecting general fishing rods and the details that should be paid attention to when selecting. I believe this will be of great help to ordinary fishing friends when purchasing new fishing rods.
First of all, you must understand that there is no so-called "universal rod" and this kind of fishing rod. You must set the species of fish you want to fish and the method of fishing to choose a suitable one. of fishing rods, and then choose the fishing rod you need after you have set them up.
Generally speaking, a rod-making factory with good reputation and perfect quality management will accurately indicate the first diameter, primary diameter, weight, length, and number of fishing rods on the outer packaging of its products. Regarding related factors, it is a pity that ordinary fishing friends will only pay attention to the weight of the fishing rod and the weight when holding it as the basis for purchase. Is this reliable? In fact, the author holds a considerable degree of support on this point. I doubt that, in fact, when a reputable rod factory develops a fishing rod, it will design and develop a suitable fishing rod based on factors such as the fishing species it is suitable for, the weight of the fish it can carry, and the suitable fishing methods. The design concepts included in it such as ergonomics, stress, lever principles, materials used, etc. are as professional as high-tech products. The author will introduce the design concept of the hand pole in the form of composition explanation.
This discussion of the key points for selecting a general hand rod and the tonality of the fishing rod is a way to facilitate readers and fishing friends. From [Figure 1] we can clearly understand that a rod has a long life and is A durable fishing rod design must be manufactured as shown in the figure. In the first curve (that is, the angle of the middle fish), the explosive force of the entire fish must be evenly distributed from the rod first to the third Internode, this place is called the "kickback force zone". A well-designed fishing rod can best demonstrate its superiority at this time, distributing the struggling force of the fish evenly in this zone, not only It makes it difficult for the fish to escape from the hook and the fishing line to break. At the same time, relying on the stress of the fishing rod, the fisherman can smoothly bring the fish to the second and third curves without using too much force. The sections of the second and third curves are called It is called the fishing zone. In this section, due to the rising angle, the kickback force moves further and further to the front. That is, the greater the angle of the fishing rod, the smaller the kickback force section, and finally the fish The strength disappears and the fish falls into the net -.
In order to emphasize its tonality and hardness, some fishing rods in the market make each section of the fishing rod shorter than one section, that is, the diameter decreases below the diameter (handle section), resulting in the following [Figure 2] ], if the kickback force is concentrated at one point, what will be the consequences?
First, the fishing rod is easy to break. If it is not easy to break, the thickness of the fishing rod tube wall must be strengthened, adding unnecessary weight.
Second, the aging period of the fishing rod occurs in advance. Since the fulcrum is always at the same position, the force cannot be evenly distributed to other parts of the fishing rod. Of course, such a fishing rod can easily soften and decay.
Third, fishermen get tired easily. Due to the effect of the leverage principle, fishermen have to exert extra physical strength, and of course they get tired easily. Dear readers, you have learned the importance of a well-designed fishing rod. Have you sex?
The next thing we want to talk about is the fishing quality of the fishing rod. In fact, the fishing quality of the fishing rod is a very abstract term. How to define it? How to judge whether this fishing rod is adjusted to 19, 28 or 37? Maybe readers will use the previous concept and say: "Look at the angle of bending of the fishing rod after the force is applied to judge its fishing performance." OK, the question is, what is the force on the fishing rod? How much force did it take? 300 grams or 1000 grams? In fact, the degree of stress on each fishing rod is not necessarily the same. How to distinguish it? It should be judged based on the size of the fish for which the design was originally designed, but it also involves the feel and weight of the fishing rod. What is the hand weight of the fishing rod? In fact, it is a 150-gram hand rod. When the center of gravity moves forward, you will feel that the fishing rod seems to be heavier. On the contrary, you will think that the fishing rod is lighter. Then the problem arises. Why not move the entire center of gravity of the fishing rod back? Doesn’t it feel lighter? No, a fishing rod with a forward center of gravity is meant to be used when fishing with a larger body. Since the kickback force will also increase when the center of gravity is forward, it is difficult to use when fishing. Fishers can use the elasticity of the fishing rod to reduce the force they use, so do you think every fishing rod has a special purpose? As long as you choose the right fishing rod, you will not only enjoy the fun of fishing, but also You are relaxed and happy.
Based on the above points, the author summarizes the purchase of a good fishing rod into the following key points. Fishing friends can choose a fishing rod that suits them according to their own needs. 1. Soft Five major items: hardness, 2. diameter, 3. weight, 4. balance point, 5. fishing speed: here the author takes the trouble to emphasize an important point. Don’t be lost by the appearance of the fishing rod. Fishing rods of the same weight will Different loads will produce different perceived weights. The weight and center of gravity displacement of the fishing rod depends on the purpose of your use.
Next, the author will introduce the issues of fishing rod materials and processing methods. Currently, almost all fishing rods on the market are made of carbon fiber materials. In addition to the factory itself, the carbon fiber materials used in them are also It is almost impossible for outsiders to understand. They can only roughly know the materials used from advertisements. This is why the author specifically emphasized the need to choose a reputable brand in the first paragraph. The author has at hand some products from Japan. The original internal information is available for readers’ reference, and you must use the company’s materials to be marked on the fishing rod. The NVC represents the high-grade and lightweight carbon fiber material of the fishing rod, and the SNVC represents the highest-grade ultra-lightweight carbon fiber material. , of course, in addition to material grade, the influence on fishing rods can be said to play a decisive role in the entire rod-making method. In addition to vertical and horizontal rolling, the general processing method also has the so-called Loop processing method. , that is, rolling a layer of carbon fiber cloth around the outside of the rod embryo to imitate lateral reinforcement. This kind of fishing rod is of course more durable, but there is currently a processing method called LASER, which is actually the same as the Loop method. , except that ultra-thin carbon fiber cloth is used for lateral reinforcement, and the overlapping wrapping not only increases the strength by 120%, but also makes the surface smooth and beautiful.