Advantages of thermal transfer cable identification cards
Cable identification cards are usually punched and fixed on the cable with cable ties or other materials. They can be easily fixed and installed. It can be easily disassembled for maintenance and used for phase sequence identification of cable branch terminals. It is different from the label paper or wire number tube directly attached to the cable. The printing life is too short and is not conducive to later maintenance and repair. The longer the time, the lighter the characters may be. It disappears in a long time, but Woyuan Cable's special identification card has strong printing and extremely high character reliability. It can achieve permanent identification by thermal transfer under service conditions and is outdoor resistant to aging, ultraviolet rays, oil stains, and scratches. Other advantages, EU standards, German technology.
Ordinary label line number tubes
Figure 1 shows ordinary label line number tubes. The service life of similar line number tubes or label paper is far less than that of thermal transfer identification cards and labels. Heat-shrinkable display tubes are soft, flame-retardant, and have a high environmental protection level. They can be printed with any characters according to actual needs. The characters and trademark patterns can be set by the computer. They are very random. They are widely used in places and equipment that require high marking requirements, such as high-speed rail. , subways, ships, buses, CRRC, CSR and other locomotives, the military-standard grade can be used in supporting products of COMAC Cable Company, such as C919 aircraft. It can operate normally in extremely cold and high environments, is resistant to high and low temperatures, and does not melt at high temperatures. , not brittle at low temperatures.
Heat shrink tube, cold shrink tube, fiberglass casing, corrugated tube, copper connector protection box, buckle tube, cable identification tube, cable identification card, high temperature casing, oil-resistant casing .