The label is an old man with many lines. If you want to fill the white background with color, how to quickly select the required area? Use the magic wand tool.
Then add the color you need to the background.
Because the picture is a whole, there is no border area, so you need to add it yourself. Use the rounded rectangle tool. Pay special attention to the path mode after selecting the rounded rectangle.
In Control Panel, under Paths, select Load Selection.
The next step is paddling.
7.？ Because the label should be attached to the edge of the box at a right angle of 90°C, we have to cut the label and attach it in half. First, use the rectangular marquee tool, select half the labels, and create a new layer cut in the Layer Bar-New Layer. In this way, the two halves are in different layers and can be operated independently.
8.？ Paste the lower part first, select the picture and right click. Transform freely first, so that one side of the label is attached to one side of the box, and then right-click to use distortion. It takes care and patience to stick the label on the box slowly. The other half has the same operation steps.
9. It is easy to operate on both sides. Visually, the label seems to be attached to the box.
10.？ Finally, preservation. As usual, the direct storage is pictures, and the storage is PSD format.