have you just started printing?

how unreliable is your household ink?

Now it's all environmentally friendly ink. The electric meter factory has been exposed to tin and copper foam for a long time. Water, is it a toxic and harmful post?

Pure tin is almost non-toxic and can be used as a kettle. However, solder contains lead, which is toxic and needs attention. But using solder may not be a toxic post. Water, acidic and corrosive. Volatile water is toxic to the respiratory tract. When the accident \ the concentration is too high \ the amount is too large \ it causes serious or even irreversible immediate damage to the human body, but generally it is considered that there is no cumulative toxicity when it is slight, so the impact is recoverable, so it is not toxic. Copper is moderately toxic, which may cause anemia. The harm of copper in the panel contact block is relatively small, so copper powder needs to be inhaled from the respiratory tract. Copper salts (including copper rust \ water in which copper or copper rust is dissolved, etc.) are harmful by direct contact with the panel. What is the harm of long-term contact with printing ink

Organic solvents such as ethanol, isopropanol, butanol, propanol, butanone, ethyl acetate, butyl acetate, toluene and xylene are often used in printing ink. Although most of these organic solvents will be eliminated after drying, the residual parts will still cause harm to human body. Especially for the printed matter with large inking area and thick ink layer, there are many residual solvents, and the toxic substances released during use pollute the air and endanger people's health. Is it a special type of work if the monitor has been exposed to toxic and harmful substances for a long time?

First of all, if it is toxic, then the enterprise should apply for it.

So,

Is it a toxic and harmful type of work for plastic printing?

It is a harmful type of work. There are many dry plastic printing here. Up to now, there are 4 septicemia caused by plastic printing in our county, which lasted less than 3 months from onset to death. I also do dry printing. I can't help it. I can't do other crafts. Note that the workshop should be well ventilated, and the continuous operation time should not exceed 8 hours, and often go out for air. There is no other way. Now there are water-based inks, but they can't be popularized and have certain limitations. I've been doing this for 1 years. Fortunately, I'm still alive ...

Is it a toxic and harmful job to do transfer printing in the factory workshop and pick up ink and banana oil?

Yes.

I have worked in many enterprises in Dongguan before. For the sake of profit, my boss will not explain this to you at all, and there will be no labor insurance products. Both banana oil and ink have volatile gases, which still have an impact on human body's long-term inhalation, but young people may not think so. The pad printed cycloethyl ketone, banana oil, Tylenol, etc. are all toxic.

First of all, you can ask the company for good labor protection supplies, and at the same time, there may be special allowances for special types of work. If there are none, you can complain to the labor bureau, environmental protection bureau, health bureau and other departments whether the PCB welding work is toxic or harmful.

Toxic, PCB welding is harmful, and transformer welding is also harmful.

Welding will emit a lot of smoke.

no, it's usually radiation, and in fact, there is a lot of fine dust, which is dry! Is the smell of printing ink harmful to your health?

Organic solvents such as ethanol and xylene are often used in traditional printing ink, and the residual part after solvent drying will cause slight harm to human body. However, when printing, a large amount of thinner containing benzene is used, which is toxic, and these * * * smells are strong. Long-term inhalation will affect the central nervous system of the brain and cause great harm to human health.

nowadays, most printing houses mainly use environmentally friendly inks. Its diluent uses water instead of organic solvent, which has no pollution to the environment and no adverse effects on human health.

The newly printed newspaper also smells of ink, but this is not harmful to the health; Of course, except for the smell of * * *. Is it a toxic and harmful job to do typography in a printing factory?

In theory, there is. But we should pay attention to safety protection, that is, labor protection, and have a strong sense of self-safety.

Meizhou Health Education Network > Occupational health > Occupational health:

(1) Common occupational diseases

1. Pneumoconiosis: It is more common among workers in cement plants, mines, gem processing plants and quarries. In recent years, there have also been new cases of illness in our city, with a high disability rate.

2. Lead poisoning: it is more common in battery factories, aluminum plate factories, typography printing houses, ceramic factories, etc., and is often misdiagnosed as acute abdomen or delayed treatment of gastrointestinal inflammation.

3. Poisoning by organic solvents: such as benzene poisoning, toluene poisoning, n-hexane poisoning, diphenylethane poisoning, dichloroethane poisoning, trichloroethylene poisoning, etc., are more common in toy factories, gift factories, electronics factories, shoe factories, screen printing factories, etc., and the poisoning symptoms are generally severe and the treatment is complicated.

4. Noise-induced deafness and high temperature: it is more common in workers in textile mills, ore grinding, crushing, stamping, chainsaws, etc., and hearing loss is caused by excessive noise; High-temperature heatstroke is also common, especially in glass, smelting, casting, plastics, boilers and outdoor operations in summer.

5. Poisoning by harmful gases: carbon monoxide poisoning, chlorine poisoning, hydrogen sulfide poisoning, ammonia poisoning, etc. are common, especially in light industry, plastics, pesticide manufacturing and other operations. These toxic gases often cause acute poisoning and group poisoning, which are often life-threatening. Attention should be paid to strengthening prevention.

6. Chemical burns: Common chemical poisons include ammonia, strong acid, strong alkali, hydrogen fluoride, etc., including burns to the eyes and the mucosa of the panel, and severe cases of disability.

7. Occupational panel allergy: Contact dermatitis and allergic dermatitis are common, which can cause panel peeling and skin laxity in severe cases, and are more common in industries such as contact with dust, organic solvents, paints and plastics.

source:: jkjy.meizhou.gov./work? 13. Find a Kunming printing factory for long-term cooperation?

Kunming Xinguang Printing Factory, a physical factory, is the first choice, and the price is OK, QQ26248.