Driving license subject two test training process (reversing the pile and moving the warehouse)

1. Move the car from the right warehouse to the starting point

1. Put down the handbrake and shift to 1st gear Drive forward and look through the rearmost triangular glass on the right side of the window until the No. 1 brake lever is no longer visible.

2. Turn the steering wheel to the right 2 times, look from the left side of the window and brake parallel to the yellow line on the ground.

2. Move the car from the starting point to the left garage

1. Turn the steering wheel 2 turns to the left, engage reverse gear, and move the No. 1 and No. 6 poles (right) when looking from the left side of the car. Diagonal line) rod is regarded as a first-line brake.

2. Turn the steering wheel to the right 2 times and see the brakes on lever 3 from the left mirror of the car.

3. Turn the steering wheel to the left 2 times, look at the glass in the rearmost triangle area on the right side of the car, and use the trademark to align the No. 2 lever with the brake.

4. Turn the steering wheel to the right 2 times, look from the left side of the window and brake parallel to the yellow line on the ground.

5. Turn the steering wheel to the left 2 times, reverse the car to about 1 meter away from poles 5 and 6 and brake.

3. Move the car from the left garage to the right garage

1. Turn the steering wheel to the right 2 times, engage 1st gear, and look out the window to see the left front wheel press the yellow brake line.

2. Turn the steering wheel 4 turns to the left, look straight ahead and apply the brakes.

3. Turn the steering wheel to the right 2 times, and continue to drive the car until it brakes about 1 meter away from pole 2.

4. Turn the steering wheel to the right 2 times, engage reverse gear, and the raised line on the front of the car and the No. 3 lever are regarded as the first line of braking.

5. Turn the steering wheel to the left for 1 turn, and look through the left mirror to see the left rear wheel of the car press the yellow line to brake.

6. Turn the steering wheel to the left 3 times, look at the car from the left side of the window and reverse until the body is parallel to the yellow line on the ground and brake.

7. Turn the steering wheel to the right 2 times and hang the brakes. In 1st gear, drive the car forward about 1 meter and brake.

8. Engage reverse gear and brake the car in reverse to about 1 meter away from poles 4 and 5.

IV. Move the car from the right garage to the original parking place

1. Turn the steering wheel 1 turn to the left, engage 1st gear, and the gap line on the front of the car and the No. 3 lever are regarded as the first line of braking.

2. Turn the steering wheel to the right once and brake until the rear of the car is clear of poles 3 and 2 (that is, the upper left corner of the right seat in the car and pole 2 are regarded as a line).

3. Turn the steering wheel to the left 2 times, look from the left side of the window and brake parallel to the yellow line on the ground.

4. Turn the steering wheel to the right 2 times, engage reverse gear, and look at the No. 3 and No. 4 (diagonal) levers from the left side of the car as a first-line brake.

5. Turn the steering wheel to the left (about 2 turns), and see the brake on lever 1 from the right mirror of the car.

6. Turn the steering wheel to the right 2 times, and align the brake lever with the No. 2 lever from the black frame edge behind the rectangular glass of the left rear door of the car.

7. Turn the steering wheel to the left 2 times, and look at the left and right mirrors to brake parallel to the car body and the ground.

8. Turn the steering wheel to the right 2 times, apply the garage brake, shift to neutral, lift the handbrake, and park the car where it started.

Schematic diagram: