How many square meters of wall can I paint with a bucket of latex paint (20kg)? Latex paint is medium.

Usually, a latex paint bucket (20 kg) is used to paint 120 square meters of wall twice, depending on the water ratio. The wall area of ??latex paint is closely related to the amount of water and the amount of wall and alkali conditions.

How many square meters of wall can be painted with a bucket of latex paint?

1. Water: Water is generally made according to the requirements of the latex factory wall. If there is too much water, the brushing area will naturally increase. However, because the coating film is too thin, quality problems will occur, such as spraying latex on the wall; if there is little water, the latex paint will have problems such as falling and tearing.

2. The number of brushings: If you only brush once, a latex paint bucket (20kg) can brush 240 square meters of wall: if you brush it twice, you can brush 120 square meters.

How many square meters of wall can be painted with a bucket of latex paint?

3. Other factors: If it is an old wall, the base layer is relatively dry, and if there is an old wall For better brushing effect, the number of pictures increases, in this case, the area of ????paint naturally decreases. If you apply a latex paint bucket (20 kg) three times, you can only paint 80 square meters.

Latex paint, which first appeared in the 1970s, is a large-scale synthetic resin latex paint. Latex paint is a water-dispersible paint, it is a resin-based latex paint that is obtained by milling and dispersing the load with the addition of several additives.

How many square meters of wall can be painted with a bucket of latex paint?

Compared with previous wall paints, latex paint has many advantages, such as easy application, fast drying, waterproof and Scratch and washable. In China, people are accustomed to using resin emulsion as the base material, water as the dispersion medium, pigments, fillers (also known as body pigments) and additives. Wall paint made by a certain process is named latex paint.

How many square meters of wall can be painted with a bucket of latex paint?

Important note:

The primer should be applied first during construction, and the primer must It dries completely after about 6 hours. Avoid construction in rain and fog. Generally, the structure is best at a temperature of 25°C and a humidity of 50%. Paint should be protected from rain and dust during painting and before drying. Note that working with wall temperatures below 10°C is not recommended. In the second update, layers had to be removed before latex paint was applied to the original painting. Then use Shuangfei powder and cooked powder to mix and mix. Then paint the latex paint, and the surface layer should be painted 2 to 3 times.

Tubatu provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design plans" for free online, as well as decoration avoidance strategies! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, and you can get it for free~