The following is a tutorial on how to put coins into the bottle. Putting the cap into the bottle is the same principle, which is equivalent to teaching two magic tricks. 1. Prepare props: 2 one-yuan coins, 1 plastic Coca-Cola bottle, a utility knife, 1 small magnet (the magnet must be strong enough, mine was removed from a Desheng radio earphone, and the effect is very good), a ring 1 piece (if you have a professional PK ring, you don’t need to prepare a small magnet) 2. Prop processing: Carefully tear the Coke bottle’s trademark along the seam, and use a utility knife to cut along the seam to insert coins. Make a small opening and stick the label on it. 3. Wear the ring on the middle finger of your left hand and insert the small magnet into the gap between the ring and your finger. The props are ready, here is how to perform. Performance steps: 1. Hold the trademark with your left hand, use a magnet to attract the coins in the bottle to the trademark, and show it to the audience. Since the coin is blocked by the trademark and your hand, the bottle looks empty. of. 2 Take out another coin in your right hand and show the audience that the coin cannot be inserted through the mouth of the bottle. Then put the coin in the palm of your hand, and then cover the mouth of the bottle with force. At this time, the coin will hit the bottle mouth and make a "pop" sound. At this time, immediately move the left ring away from the bottle, or rely on the momentum of the impact to make the original ring The coin sucked behind the logo falls to the bottom of the bottle. 3 At this time, there is still a coin in his right hand. He continues to hide it in his hand and hands the bottle to the audience for inspection. Then tell the audience to take out the coin. Turn the bottle upside down and hold it with the mouth of the bottle facing down. Your left hand (ring) is still holding the label, and your right hand is holding the bottle mouth. Try to leave as little space as possible between your hands. Gently shake the bottle to let the magnet attract the coin again (the shaking at this time can make the audience mistakenly think that the magician is looking for a place to let the coin come out). At this time, spread your right hand to show the coin, and then hold the bottle upright. Make the audience think that the coin is being removed. 4. Without waiting for the audience to ask for inspection, immediately "change" the coin in, and then let the audience inspect it. At this time, hide the coin in your right hand in your trouser pocket. The show is over. Note on details: 1. When cutting the bottle, be sure to follow the seam of the trademark, and the length should be slightly longer than a coin. 2. During the performance, the trademark should always be kept in line with the audience’s eyes. 3. The water in the bottle does not need to completely evaporate. Leave a little inside to give the inner wall of the bottle a mist-like feel, making it harder for the audience to detect the "wound" on the bottle. 4. The coins in the right hand should be hidden naturally. 5. Practice the "taking out" step more. This is the difficulty of the whole magic and the key to success or failure. Finally, I wish you success!