The physical method is as follows

Hair dryer: As long as you use a hair dryer to heat and blow for a while, you can easily tear off all kinds of signs.

2. Electrostatic sticker: Electrostatic sticker has strong adhesion and can be attached to the label. Rub it with your hands for a few times and then tear off the label directly to ensure that it is pasted firmly. There may be glue residue on the glass wall, which needs to be used in conjunction with other methods.

3. Hand rubbing: soak the label with water or detergent, wait for two minutes, and rub the label repeatedly with steel balls for washing dishes until the adhesive on the label is completely removed.

The chemical method is as follows:

Cleaning agent: Some label papers with weak adhesion are soaked in hot water and can be removed when the labels become soft. For labels that are not stuck for a long time and cannot be torn off, they can be soaked in hot water to soften the gums first. Soak the towel in soapy water, washing powder water or detergent to completely remove the label.

3. Gasoline and essential balm: Prepare a bottle of essential balm, smear it on the label paper to be removed with a towel, and fully soak it. After about half an hour, gently wipe it with a towel and repeat it several times. It can also be replaced by gasoline to achieve the same effect.

3. Plastic wrap: Apply detergent (original juice, not diluted with water) evenly on the back of the label to be uncovered. Tear off a piece of plastic wrap and cover it on the label, so that it completely covers the label. At this time, the plastic wrap will be labeled. Wipe the plastic wrap slowly with your hands, and squeeze out all the tiny bubbles between the plastic wrap and the label to make it smooth.

Leave this state 10 minutes to 20 minutes. Finally, tear off the plastic wrap, which will completely bring down the label to be removed without leaving any traces on the glass, which is super efficient. Dry the residual detergent with a wet towel.