The so-called CCC certification is the compulsory product certification system in China, which is called China mandatory Certification in English or CCC for short. All products in CCC catalogue must be certified before being sold in the domestic market. Gas cookers are in the CCC certification catalogue, so they must pass CCC certification before they can be sold in the domestic market.
3C mark is not a quality mark, but a basic safety certification.
From June 5438+1 October1day, 2020, domestic gas cookers were officially listed in the 3C (National Compulsory Certification) certification scope catalogue, and gas cookers without 3C certification were no longer allowed to leave the factory, sell or import. At the same time, it is stipulated that before June 65438+1 October 2020 1 day, the production enterprises that have obtained the production license of gas stoves can carry out 3C conversion certification free of charge according to the production license until June 65438+1day 2020. I haven't changed it since.
The 3c mark on the natural gas cooker indicates that the cooker has obtained 3C certification. Obtaining 3C certification shows that the natural gas cooker meets the product evaluation of protecting consumers' personal safety, protecting the environment and protecting national security.
Detailed description of compulsory CCC certification process for household gas cookers:
One: Apply for registration
Required information: 1. Business license; 2.CCC application; 3. Product description/specifications; 4. Product pictures (if necessary)
Two. Institutional audit-acceptance
The certification body shall examine the contents of the application documents submitted by the applicant.
1. If the application documents and materials submitted by the applicant are not in conformity with the provisions, notify the applicant to supplement or modify the application materials and resubmit the documents for review.
2. The documents submitted by the applicant meet the requirements, and the certification body will accept them. And issue a notice of acceptance, a list of required documents, and a notice of sample delivery.
3 enterprises send formal applications, copies of business licenses, factory questionnaires and other materials to certification bodies.
Three: sample sending and testing.
1. After passing the acceptance test, the certification body gives the testing task to the laboratory;
2. The certification body sends a sample notice, and the enterprise sends/sends samples to the laboratory; (Enterprises need the following materials to the laboratory: samples, product manuals/instructions, list of key components and certification information, circuit schematic diagram, model difference statement (when applying for series), nameplate labels, and other materials that may need to be provided. )
3. The laboratory accepts testing tasks and receives samples of products and materials;
4. Laboratory test samples;
Compliance: issue a type test report and submit it to the certification body;
Unqualified: the laboratory informs the enterprise to rectify, and the enterprise sends samples again after rectification, and the laboratory re-tests.
Four: factory inspection (factory audit)
1. According to the application materials of the enterprise, the certification body sets up a factory inspection team and issues factory inspection tasks;
2. The factory inspection team should make on-site inspection plan;
3. Go to the enterprise for factory inspection;
4. Issue the factory inspection report after inspection;
5. Evaluate the inspection report. Unqualified, notify the enterprise to rectify and submit rectification materials. After the rectification is completed, the certification body evaluates the rectification materials of the enterprise, judges whether on-site inspection is needed, and sends an inspection team to inspect the factory again if necessary.
6. After passing the factory inspection, enter the evaluation link.
Before the factory review, it is suggested that enterprises provide factory review guidance, and enterprises should prepare materials, production instruments and equipment, inspection instruments and equipment, equipment calibration and system documents in advance.
Verb (abbreviation of verb) evaluation of authentication results (payment-issuance)
1. The certification body shall summarize the laboratory type test report and the factory review report, and issue the review report and charge notice after the review. (Enterprises need to pay related expenses when sending money. )
2. Whether to pass:
If it is unqualified, it needs to be rectified and the certificate will not be issued for the time being.
If passed, the certification body will issue the national compulsory CCC certificate to the applicant.
Supervision after authentication of intransitive verbs;
Supervision and inspection of certified enterprises
1. Certification bodies shall organize supervision and inspection of certified enterprises at least once a year.
2. The certification body will issue a supervision and inspection plan, and send an inspection team to the enterprise as planned to conduct ex-factory inspection on product consistency, and decide whether to conduct sampling inspection on products according to the inspection results.
3. (If sampling is required); Check whether the product is qualified;
Hege: the enterprise continues to keep the certificate valid;
Unqualified: suspend certification, issue rectification notice, urge enterprises to rectify, and check and evaluate the rectification results. If the rectification fails for many times, the enterprise certification certificate shall be suspended and revoked, and announced to the public.
Note: Some types of products can be certified before factory inspection (factory inspection within three months after obtaining the certificate), such as IT, AV, communication and other products. The process of this kind of products will be slightly changed, and the certification cycle will be relatively shortened, which is relatively convenient.
Information required for application for 3c certification of household gas cookers
1, product description;
2. Product specifications;
3, product maintenance manual;
4, product circuit diagram (including schematic diagram and printed circuit board diagram);
5. Description of the difference between the main delivery model product and the coverage model product in the same application unit;
6. List of key components related to product safety and list of main components affecting electromagnetic compatibility;
7. Copy of certification certificate for key safety components of products;
8. CB test certificates and reports of products;
9, product trademark authorization, etc.