1. Prepare the required materials
When pasting deerskin, you need to prepare the following materials: deerskin, scissors, repair glue and detergent. Lupi should choose non-woven fabric material, because this material can better maintain temperature and humidity.
Clean the refrigerator
Before you start pasting Lupi, you must clean the refrigerator. Take everything out of the refrigerator and wipe the inside and outside of the refrigerator with detergent and wet cloth. Ensure that the accumulated water in the pool rack and drain pipe has been removed.
Cut off lupines
When cutting deerskin, make sure it is the right size and can completely cover the inside of the freezer. Cut the whole and uniform deerskin to ensure that there is no residue or protrusion.
4. Stick to Lupi
Once the Lupi is cut out, you can start pasting it. First, stick Lupi from the bottom of the freezer to make sure it covers the whole bottom. Then, stick Lupi on the wall and top. When sticking Lv Pi, make sure the coverage is even, leaving no gaps.
Repair cracks
If cracks are found in the process of sticking Rupi, they must be repaired with repair glue. The repair glue should be coated on Lupi and dried in the freezer. It connects the Lupi and the freezer to prevent air leakage.
6. Final inspection
Once the Lupi is completely pasted, finally check whether there are cracks or gaps in the freezer. If so, it must be repaired. Make sure there are no ornaments or sundries left in the freezer, and then check if Lupi is near again.
Overall, this is a very simple way to help you maintain the freezer and food. Sticking deerskin in the freezer can not only reduce the electricity bill, but also extend the shelf life of food. This method is suitable for freezers of any size and shape.