The DeLLlnspiron155000 laptop cannot be installed after installing the system using a USB flash drive and restarting.

If the computer cannot start, you can try reinstalling the system to solve the problem. There are many ways to install the computer system. You can choose one of the methods listed below.

1. Hard disk installation: After booting or restarting, press the F11 key or F8 key to see if one-key GHOST or similar software is installed. If so, select one-key restore and press Enter to confirm and enter the one-key restore operation. After entering the interface, select "Restore" to confirm. If you have performed a one-click backup when you first installed the computer, you can restore it to the state at the time of backup. In addition, if you can enter the current system or press F8 when booting to enter the command line mode, you can search for the GHOST.exe program and GHO system file of the WINDOWS version or DOS version, and then manually run the GHOST program to load the system GHO file or reinstall the system. .

2. U disk installation: If there is no one-click restore, use the system U disk to reinstall the system. The steps to start the U disk production and U disk reinstallation system are:

(1) Make a startup U disk: Go to a physical store to buy a U disk with a capacity of more than 8G, search online and download Laomaotao or Chinese cabbage Wait for the U disk creation tool to start, insert the U disk into the computer and run this software to make a bootable U disk, then go to System Home or a similar website to download the GHO file of operating systems such as WINXP or WIN7, and copy it to the U disk or the U disk specified by the startup tool. folder and rename as required. You can also search online and download system image files in ISO format (containing GHO system files or complete system installation files), and use tools such as ultraiso to release them to a USB flash drive to create a bootable USB flash drive containing the system.

(2) Set USB disk boot: turn on the computer and press the DEL key (usually F2 or other for notebooks) to enter the BIOS setting interface, enter the BOOT tab and set the USB disk as the first boot item (Note: Some computers require At this time, insert the U disk for recognition before setting), then press F10 to save, exit and restart. Some new motherboards support pressing F12 or F11 after booting to enter the startup options menu. You can directly select a USB flash drive or other required startup items to start the computer without entering the CMOS interface.

(3) U disk reinstallation system: Insert the U disk to start the computer, enter the U disk function menu, select "Install system to the first partition of the hard disk", press Enter to confirm and follow the prompts, the computer will Automatically run the GHOST software and automatically search for the GHO files on the USB flash drive, clone them and install them in Area C. The entire process requires little manual intervention until you finally enter the system desktop.

3. CD installation: Use a CD to reinstall the system on your computer. The steps are as follows:

(1) Prepare the system CD: If you don’t have one, you can go to a computer store to buy it. What system needs to be installed? Just buy the latest version of the CD for any system. If you have a CD-ROM drive, you can also go online to download system files in ISO format and burn them into a system CD.

(2) Set the CD-ROM boot: After turning on the computer, press the DEL key (usually F2 or the hotkey according to the bottom line of the screen) to enter CMOS, and set the optical drive (CD-ROM or DVD-ROM) as the first startup item, then press F10 to save, exit and restart. When restarting the computer, promptly insert the system CD into the CD-ROM drive.

(3) Clone and install the system: After the CD is successfully started, the function menu will be displayed. At this time, select "Clone and install the system to Area C" in the menu. After pressing Enter to confirm, the computer will automatically run the GHOST software. The GHO file is automatically loaded and cloned and installed in Area C. The entire process requires little manual intervention until the system desktop is finally entered.

Note: After the system installation is completed, first install security software such as 360 Security Guard plus 360 Antivirus or Kingsoft Antivirus and other security software to conduct a comprehensive search and kill of Trojans and viruses, and then patch the system and install it Commonly used software, download and install it and use the one-click restore tool to back up the system in case of emergency. The laptop cannot start and the optical drive is damaged. How to install the system using a USB flash drive?

Make sure the motherboard supports u*** startup and the u*** size must be large enough.

Download or make a ghost image or CD installation image of Disk version.

u ***oot makes a bootable USB disk and copies it into the ghost image

Start the USB disk and use ghost to copy the image to the hard disk

Complete.

If this information is not enough, then give it a try. If you are not suitable to do it yourself, find someone to do it. The Lenovo laptop cannot restart after installing the system using Chenfeng USB disk

Reinstalling the system solves the problem.

Search "Don't look back" on Baidu to download the pure system installation package.

Then you can choose to install the system on a hard disk or a USB disk according to the situation.

Hope you adopt it! The laptop cannot be turned on, how to install the system from the USB flash drive! Looking for a tutorial?

Use a U disk to install the system (System). The U disk has a minimum capacity of 1G, of which more than 100 MB of space is used to store the PE system (System) (used to boot the system (System) and install XP etc.), the remaining 800 M space is used to store the installation files of the XP system (System).

In this example, we take the installation of an XP clone version as an example (you must be prepared on a normally operating computer (PC) before you can perform the installation on your computer (PC)):

1. Download (DownLoad) and install the 'U disk boot system (System) production tool' (it is recommended to use the 'Chinese cabbage U disk boot program').

2. Open (OPEN) the installed production tool and follow the prompts to operate (Note: When selecting the U disk format, select the USB-ZIP format. This format is suitable for computer (PC) hard disks. The drive letter of the partition has no effect at all, and is most suitable for beginners. If it is originally a C drive, when you use a USB flash drive to open the PE, it will still be a C drive, and there will be no confusion.) After making it, delete the USB flash drive and remove it. Download the USB flash drive.

3. Download (DownLoad) the XP system (System) image, preferably a clone version. The installation steps are easy and fast. Save yourself a lot of trouble

4. Use the decompression software to decompress the downloaded image (usually an ISO file) to a folder (the folder name must be in English and not too long) ), after the decompression is complete, copy the entire folder to your prepared USB flash drive.

The above work must be completed on a computer (PC) that can run normally. The following must be completed on your computer (PC)

5. On your computer (PC) Insert the U disk you made, turn on the computer and press the del key to enter the CMOS settings (different models will have different buttons, you can find the specific situation on Baidu), set the first startup device to USB-ZIP, save and exit. Afterwards, the system will open to the PE system.

6. After the PE system (System) is opened, the interface is similar to the XP system (System). At this time, open (OPEN) my computer (PC) - open (OPEN) the U disk and find Open the System folder, open it one by one, and look for the hard disk installer program (generally available in the new cloned system). After opening, you will find the installation location and source. Directory reminder such as mirror location), you can install it after specifying it. If you don't have this program, you may first find the gho file in the folder, remember the location, then click Start - Programs, find the ghost program, manually specify the location of the gho file, and follow the next step to install it.

Note: The U disk installation speed is still relatively slow. It is best to copy the system folder to the D drive or E drive and then open the (OPEN) hard disk installation program to install the system. ) The installation speed is not affected by the U disk transfer speed.

With the program installed in this way, if some hardware does not work properly, you will have to manually install the hardware driver (Drive) program.

How to use a USB flash drive to install the system on an Apple laptop

Steps to install the system using a USB flash drive:

1. First, make the USB flash drive into a U-deep USB boot disk, then restart the computer and wait for the boot screen to appear. Press the startup shortcut key on the screen, select the USB disk to boot to enter the udeepin main menu, select the "03Udeepin Win2003PE Classic Edition (Old Machine)" option, and press the Enter key to confirm.

2. After entering the win8PE system, the installation tool will pop up on its own. Click "Browse" to select the win7 system image file and save it to the USB disk.

3. Wait for the udeepinpe installation tool to automatically load the win7 system image package installation file. Just select the installation disk location and click the "OK" button.

4. Click the "OK" button directly in the pop-up prompt window.

5. The installation tool will then start working, please wait patiently for a few minutes.

6. After completion, a prompt to restart the computer will pop up, click the "Yes (Y)" button.

7. At this time, you can remove the USB disk and restart the system to start the installation. No operation is required. Just wait for the installation to complete. It will restart again before entering the system desktop.

How to use a USB flash drive to install the system on a Conowei laptop?

Go online and download a tool to make a USB boot disk and make your USB boot disk.

Then plug it into the computer, turn it on, and on the interface that displays the computer logo picture, press f12. If you enter the boot device selection interface, you don’t need to enter the bios, just select the u *** item to enter the USB disk pe system and install the system< /p>

If there is no response after installing F12, enter the bios to set up the USB disk to boot, and then enter the USB disk pe system to install the system. How to use a USB disk to install the system on a Sony laptop?

Reinstall the system from a USB disk The operation steps are:

(1) Make a bootable USB flash drive:

A. Go to a physical store to buy a branded USB flash drive with a capacity of more than 8G.

B. Search online and download startup U disk creation tools such as Laomaotao or Dabaicai. Insert the U disk into the computer and run this software to create a startup U disk.

C. Go to System Home or a similar website to download the GHO file of operating systems such as WINXP or WIN7, copy it to the U disk or the U disk folder specified by the startup tool, and rename it as required.

You can also search and download the system image file in ISO format (containing GHO system files or complete system installation files) online, and use tools such as ultraiso to release it to a USB flash drive to create a bootable USB flash drive containing the system.

(2) Set up the U disk to start:

A. Press the DEL key when turning on the computer (the CMOS hotkeys of different brands and models of computers are different, and the laptop is generally the F2 key) to enter the BIOS setting interface.

B. Enter the BOOT (or startups) tab, select the U disk (there are different formats such as USB-HDD, USB-FDD, etc., USB-HDD is preferred) as the first startup item and press Enter to confirm (Note : Some computers need to insert the USB flash drive at this time for recognition before setting).

Some new motherboards support pressing F12 or F11 after booting to enter the boot options menu. You can directly select the U disk (the model of the U disk is recognized after inserting the U disk in advance) or Generic Flash Disk ( Universal flash drive) or Removable Device (removable disk) to start the computer.

Some old motherboards need to enter the Advanced BIOS Features tab, press Enter at "1st Boot Device", and then select USB-HDD.

C. Press F10 to save, exit and restart.

(3) U disk reinstallation system:

A. Insert the U disk to start the computer.

B. After entering the U disk function menu, select "Install system to the first partition of the hard disk", press Enter to confirm and follow the prompts, or after entering the PE system, run "One-click installation system" on the desktop ", the computer will automatically run the GHOST software and automatically search for the GHO files on the USB flash drive, clone them and install them in Area C. The entire process requires little manual intervention until the system desktop is finally entered. Can the Samsung P25 laptop use a USB flash drive to install the system?

USB flash drive to install the system;

1. Make the USB flash drive into a u deepin USB boot disk, and then go to the relevant website to download it Save the win system to the USB boot disk, restart the computer and wait for the boot screen to appear. Press the startup shortcut key. Select the USB disk to boot and enter the u Deepin main menu. Select the "02u Deepin WIN8 PE Standard Edition (new machine)" option and press Return. Press the car key to confirm

2. Select the win image in the PE installation tool and place it on the c drive, click OK

3. Click the "OK" button directly in the pop-up prompt window.

4. Then the installation tool starts to work, we need to wait patiently for a few minutes

5. After completion, a pop-up prompt box will prompt whether to restart immediately. At this time, we directly click Now Just restart.

6. At this time, you can remove the USB disk and restart the system to start the installation. We do not need to perform any operations, just wait for the installation to complete. The notebook uses a USB flash drive to install the system and then restarts, and then a blue screen appears. When other computers use a USB flash drive to install the system, it works normally.

Change the system, or manually select the driver during installation. There may be a driver mismatch. After installation, use Driver Wizard to install the device driver. How to use a USB flash drive to install the system on a laptop without network

When it comes to bios, laymen should not do it. It is best to Baidu your computer model and then use a USB flash drive to install the computer. There are tutorials