Is the ETC card divided into front and back? ETC card insertion direction picture

As major banks have launched various preferential measures for ETC card processing, many car owners are eager to sign up, and a large part of them can be obtained for free online. However, problems after the ETC equipment is installed have troubled many driver friends. Some electronic tags fail due to improper installation, some ETC cards cannot be activated due to improper use, and some people have to pay the cost of the equipment due to human damage. Let’s take a look at some ways to use ETC. Does this ETC card have front and back? Teach you some skills to avoid too much unnecessary trouble.

Is the ETC card divided before and after?

Split. How to insert the ETC card into the ETC device (also known as OBU or electronic label): The front of the ETC card faces the driver, the back of the card faces the front glass, and the chip part must be inserted into the OBU device. The specific installation requirements and methods of ETC are as follows:

1. The height shall not be less than 1.2 meters and not exceed 2.5 meters.

2. The installation angle n should be 30 ordm-90 ordm; Between (the angle between the electronic tag surface and the horizontal plane).

3. The OBU equipment of small vehicles such as cars and vans is installed in the middle and upper parts of the front windshield level, and that of large vehicles such as trucks and buses is installed in the middle and lower parts.

4. If the vehicle itself has an explosion-proof film or the explosion-proof film is attached later, the explosion-proof film contains metal ions, which will affect the signal transmission of the microwave communication link, so it must be installed on the "microwave skylight" tape, or Open a rectangular area of ??8cm X1 0cm for the explosion-proof membrane.

(ETC card direction diagram)

5. After receiving the device, first check whether the ETC card and electronic label (OBU) are damaged. Press the anti-tamper button on the back of the OBU, the red light will light up briefly, and the organic light-emitting diode screen will display the words "Invalid Tag" and "Please Insert Card", indicating that the device is normal.

6. Clean the front windshield, keep the glass surface smooth, clean, and dry, then tear off the OBU adhesive protective film, stick it to the installation position, and press it with your hands for 2-3 minutes to drive away the bubbles.

(ETC card direction diagram)

ETC device activation method

1. Insert and unplug the ETC card twice continuously until the electronic label screen displays "Bluetooth has been activated" "Open", if the monitor is plugged and unplugged twice with "invalid label" without electronic labels, this is a normal phenomenon and does not affect activation. You can also directly press the button on the top of the electronic tag to turn on the Bluetooth function.

2. Turn on the Bluetooth of your mobile phone, open the Yuetongbao app applet (please download the corresponding mobile app according to the brand of the electronic label. Generally, there is a download QR code on the electronic label), and enter the device activation interface.

3. Then click Device Connection and wait patiently for the "Successful Connection" prompt.

4. Then upload a photo of the front face of the vehicle to complete activation. If you don’t understand the video, you can click to view it (ETC device installation and activation method).

Although the installation is successful, many people don’t know how to use ETC, let alone how long it takes to charge ETC. Some car owners have even stolen ETC brushes. Come take a look and avoid pitfalls!

First of all, you need to know that ETC devices do not need to be charged. ETC electronic tags have no charging cable and use solar energy to charge. Bluetooth is only used when charging. Through high-speed automatic sensing, there is no need to turn on Bluetooth all the time.

About the use of ETC

1. The ETC transaction sensing area is 8m. When the car in front is parking, in order to prevent the ETC equipment of the car in front from failing or having no ETC equipment at all, you must keep a distance of more than 10m from the car in front to prevent the payment of the car in front from being automatically sensed.

2. The speed of ETC lane traffic recognition is 20km/h. If the speed is too fast and the vehicle equipment information cannot be read, the deduction will also fail.

3. Unauthorized dismantling and moving of OBU equipment, ETC electronic tags falling off or loosening, etc. wait. , will cause the electronic tag to become invalid. It can be sent to the bank or highway office that handles ETC cards for testing. If it falls off artificially, it only needs to be reactivated.

4. When using a debit card to bind ETC, insufficient balance will also cause the deduction to fail. You can follow the guidance of on-site staff to the manual MTC lane and use cash or credit card to pass.

To sum up, from the perspective of the pros and cons of ETC, the pros of ETC outweigh the cons. As long as you master scientific usage skills, you can still improve your performance and reduce operating costs. From the perspective of national policy, the transportation department has issued instructions to ensure that the non-stop utilization rate of ETC express delivery reaches more than 90% by the end of the year. This reminds me of the sentence "tens of millions of high-speed articles, leave one manually, without ETC, queuing is hard" .