Required materials:

The original valid ID card of the car owner and the original vehicle driving license (if the owner is not applying in person, the original ID card of the agent must be provided).

Processing process:

1. Bring the necessary materials and drive to the Sutong Card customer service outlet for processing.

2. Go to the Sutong Card customer service outlet to fill in the relevant application forms and other materials, provide the original and copy of the valid ID card and vehicle driving license, and also need to fill in the "Jiangsu Internet Expressway ETC Toll Business Application" Form" and "Electronic Tag Use Agreement", of course, can also be downloaded from the Internet, filled out and stamped with the official seal before processing.

3. Payment: 420 yuan/vehicle (including electronic tag usage fee of 350 yuan and ETC card production fee of 50 yuan).

4. After passing the review, the surveyor will measure and verify the vehicle information, install and activate electronic tags and other related equipment. If an explosion-proof film is installed on the windshield of your vehicle, a piece of film of about 10mm*7mm must be cut off at the installation location before installation. Generally, it is installed near the windshield rearview mirror for small passenger cars, and for large and medium-sized passenger cars. On the lower left windshield of the driver's seat.

Application location:

No. 189 Maqun New Street Map:

Currently, there is only one Sutong Card customer service outlet in Nanjing, which is located on Jiangsu Expressway The Sutong Card Customer Service Center of the Highway Network Operation and Management Center and the Sutong Card processing outlet address are: No. 189 Maqun New Street.

Extended information:

ETC is a non-stop electronic toll collection system. ETC dedicated lanes are used by vehicles equipped with ETC on-board devices and use electronic toll collection.

ETC (Electronic Toll Collection) non-stop toll collection system is currently the most advanced road and bridge toll collection method in the world.

Through the microwave dedicated short-range communication between the vehicle electronic tag installed on the vehicle windshield and the microwave antenna on the ETC lane of the toll station, computer networking technology is used to perform background settlement processing with the bank, thereby achieving The purpose of vehicles passing through a road and bridge toll station is to pay tolls without stopping.

As of October 2018, the ETC usage rate in most provinces in China is less than half, and in some provinces it is less than 30%.

Baidu Encyclopedia—ETC