The workers are using carving knives to carve out exquisite textures on the belt. The complex production process and complete hand-making greatly increase the luxury of the belt.

First, the worker puts the small stainless steel bag into the welding furniture and welds it together accurately, then puts it into another welding furniture, and adds a center cut on the back of the belt buckle. After welding, , melt the center and sharpened top into a smooth ball, and you can fix the belt to the belt buckle. Workers then use a wire saw to cut the shape of the belt buckle out of the sterling silver plate, and then print the company's logo on it. Then weld the newly welded steel bars to a molten steel glue.

Second, then use a wire tool to cut the letters. The font size of the letters can be customized. Then use a welding gun to apply solder on the back of the letters. The worker carefully picks up the letters and places them on the sterling silver belt buckle. , when workers heat the back of the belt buckle, the letters will stick tightly to the surface of the belt buckle, then apply a polishing mirror on the belt buckle, and then use a polishing wheel to polish the belt buckle until it is as bright as a mirror. In order to make the belt buckle look more luxurious, workers will use a variety of tools to hand carve the belt. The next step is the belt.

Third, the worker lays the raw material of a belt flat on the table, and then uses a leather knife to cut a belt according to the width required by the customer. Next, workers will use more than ten kinds of tools to carve and shape the belt. First cut off two sections of the belt and soak it in water at room temperature for about five minutes. When the belt stops bubbling, it means it is saturated. After the belt is completely dry, the worker prints the designed pattern on the belt, then uses a blade to cut out the hook groove according to the texture of the pattern, then uses a carving knife to deepen and widen the hook groove, and then uses a disposable background carving knife to create the relief background, then a dark dye is applied to the engraved embossed background and the factory logo is stamped on one end of the belt. Finally, use a piece of sheepskin to apply leather paste on the surface of the belt, which can make the belt look more vintage. After completion, the workers use a punching machine to make a few small holes in the belt, and then connect the belt and the belt buckle with hollow rivets, and you're done.