To eliminate the small house-like logo on the Gree air conditioner remote control, you can follow the following steps:

1. Open the battery compartment of the air conditioner remote control, take out the battery, and ensure that the remote control is in Completely shut down to avoid generating current.

2. Use a small screwdriver or other tool to gently open the shell of the remote control and observe the layout of the internal parts, especially the parts related to the logo.

3. Look for components related to the logo, which are usually added to the remote control shell in the form of stickers or small sculptures. You can notice prominent patterns or text.

4. If the logo is a sticker, you can gently tear it off. Use your fingernail or a knife to grab one corner of the sticker and slowly peel off the entire sticker. If it is stuck tightly, you can moisten it with warm water or mild detergent and then try to tear it off. Be careful not to use too much force to avoid damaging the remote control shell.

5. If the logo is a sculpture, it can be carefully scraped off with a knife or appropriate tool. Be sure to handle it carefully to avoid scratching the remote control casing.

6. After completing the above steps, you can use detergent or wet wipes to gently wipe the remote control shell to remove any remaining glue or scratches.

7. Finally, reassemble the remote control shell and reinstall the battery. Make sure the case is closed tightly and the remote control is working properly.

The above steps can help eliminate the small house-like logo on the Gree air conditioner remote control. Be careful when handling the remote control to avoid damaging other parts.