The "two-in-one" and "three-in-one" bathroom heaters refer to the classification of bathroom heaters according to their different functions.

The two-in-one bathroom heater is specially designed for installed ventilation fans, low bathrooms, and old residential bathrooms. The two-in-one bathroom heater has only two functions: lighting and heating, and is characterized by easy installation.

The three-in-one bathroom heater is no different from the ordinary bathroom heater in terms of exterior light design and working principle. It just has three additional functions: lighting, ventilation and heating.

There are also four-in-one bathroom heaters that include lighting, air heating, ventilation and lamp heating, and five-in-one bathroom heaters that integrate the five functions of lighting, heating, ventilation, heating and temperature display.

Extended information

Purchase of bathroom heater

1. When purchasing bathroom heater, you should also consider the bathroom space. Generally, small bathrooms are small in area and have relatively large water mist, so it is best to choose a bathroom heater with better ventilation effect; if it is a newly renovated room, you can consider installing a ceiling-mounted bathroom heater that does not take up space and has a wider choice of style and appearance; If it is an old house, you need to choose a bathroom heater based on whether there is a suspended ceiling, whether the ceiling is thick enough, and whether there are enough plugs.

2. Choose an intelligent fully automatic negative ionizer bath heater. Choose one that integrates heating, lighting, ventilation, blowing, air guidance and air purification. It uses a built-in electric overheat protector. When the temperature rises to a certain level, it will automatically shut down; and the fresh negative ionizer technology allows it to continuously flow. It generates fresh negative ions on the ground to prevent the growth of bacteria in the air and make the bathroom air fresher.

The fan has low noise and powerful ventilation function, which can promptly remove dirty air, odor and moisture in the room, enhance air circulation and keep the air fresh. Try to use a large lamp distance design. The advantage is that the distance between heating bubbles is increased to make the heat radiation surface wider, so that the heat covers a wider area in the bathroom and the heat distribution is more even. At the same time, you can also flexibly adjust the temperature through the remote control.

3. Choose a bathroom heater with outstanding decorative features. The bathroom heater is installed on the top of the bathroom and does not take up any space. The latest bathroom heater is more modern in terms of reduced thickness, streamlined shape and diversified colors, and has a good decorative effect. The heating bubble adopts a low color temperature design, the light is soft and does not irritate the eyes. This kind of bathroom heater has many fashionable shapes such as butterfly, star, wave, rainbow, palace, etc. It fully captures the beauty of nature and can add a harmonious atmosphere to your bathroom.

In addition, the mask’s unique combination of stainless steel and plastic materials better matches the decoration and can match the beautiful and unique bathroom space.

5. Select the power according to the usage area and height. When choosing a bathroom heater, it depends on its use area and the height of the bathroom. Bath heaters on the market mainly have two, three and four heating bulbs, and their applicable areas vary.

Generally, the height of the bathroom is 2.6m. A bathroom heater with two bulbs is suitable for a bathroom of about 4 square meters. This is mainly for old-fashioned buildings with small bathrooms; a bathroom heater with four lights is suitable for bathrooms with a height of 6-6 meters. A bathroom of about 8 square meters is mainly suitable for families in new residential buildings.

6. Inspect the materials used and the appearance of the workmanship. When purchasing a bathroom heater, you should also pay attention to check the appearance and craftsmanship level, which requires stainless steel, painted parts, plastic parts, glass frames, electroplated parts, etc., with uniform and bright surfaces, no peeling, no dents or serious scratches, or extrusion marks. pretty. When choosing, be careful to identify fake and shoddy products. They often use counterfeit trademarks and packaging, or use assembled brands to pass off as original products. However, such products generally have rough appearance and craftsmanship.

7. Understand the cost-effectiveness of various types when purchasing. Generally, the normal selling price of a 4-light bathroom heater should be more than 500 yuan, and may go up depending on the number of functions and changes. If the price is lower than this price, its quality should be considered.

Due to the strict requirements of bathroom heaters on heating lamp technology, the price of high-quality bathroom heaters will not be very low. If consumers see a 200-300 yuan bathroom heater on the market, or even one with four lights , most of them are shoddy and fake products, because the price of an infrared heating bulb with qualified safety indicators should be more than 50 yuan, four of which are 200 yuan, and the price of other genuine accessories must also be around 150 yuan, plus the manufacturer's profit, at least The selling price should also be above 500 yuan. In order to reduce costs, low-priced bathroom heaters can only use some low-priced raw materials, thereby reducing the safety of the bathroom heater. Consumers must not be fooled.

8. Choose brand-name products from 3C certified professional manufacturers.

Some large factories with strong technical and financial capabilities develop electrical brand-name products that generally have relatively sophisticated workmanship, stable performance, safety and reliability. When purchasing, you should check whether there is a 3C certification standard for home appliances in my country that requires uniform product quality. Certified products should have the words 3C certification on the body or packaging; they should also have a production license issued by the state, with the name and address of the factory. , date of manufacture, product certificate, inspector’s number, as well as drawings and instructions, after-sales credit card, repair station address and telephone number, etc.

9. Choose products with guaranteed after-sales service. Brand-name products produced by professional bathroom heater manufacturers and recognized by the market generally have a one to three-year warranty and lifetime maintenance. There are local maintenance service outlets that provide free installation and door-to-door maintenance. When spare parts such as heating lamps fail, they can be immediately replaced and supplied to the manufacturer for a long time, and the products can be upgraded free of charge. Therefore, consumers should choose products with complete after-sales service.

Baidu Encyclopedia: Yuba