How to distinguish automobile parts from original parts, brand parts and sub-factory parts? To be honest, for many car owners, it is completely a blind spot. Because under the existing processing technology, many processing enterprises have the production capacity of ordinary automobile parts (mainly mechanical metal and plastic parts), and they can all be used normally. There is no stable service life. Therefore, the identification of auto parts should mainly be carried out from three aspects: packaging, workmanship and details!

what are original factory parts, brand parts and sub-factory parts?

first of all, let's learn about the original parts. Original parts refer to the parts produced by automobile manufacturers themselves or entrusted by authorized automobile parts manufacturers, which are mainly used for supporting vehicles and authorizing 4s shops to provide after-sales service for vehicles. The most obvious feature of the original parts is that both the packaging and the parts themselves bear the brand logo of the brand car and the parts number written internally. Therefore, most of the original parts will be circulated between 4s stores or 4s stores.

if you know the original parts, you can better understand the original parts. In fact, the production technical standards adopted by the original factory parts and the original factory parts are the same. In other words, the factory parts manufacturer also has the strength of the original parts manufacturer. Therefore, in the bidding of vehicle parts for automobile production enterprises, the winning enterprise will be authorized, and the products produced will be called original parts, while those without winning the bid will naturally be called original parts. Therefore, the factory parts are similar to the original parts. But for ordinary consumers, they usually care less and have less contact, so it is easy to be confused with brand parts.

The so-called brand parts are generally well-known local manufacturers with a certain production scale and technical level. But compared with large enterprises, it is not in a class. Therefore, on the whole, the quality of the produced accessories can still be guaranteed. In fact, the warranty period of brand parts is the longest or the most daring among these types of accessories. Therefore, brand parts are also the most popular products for accessories dealers. In addition to not worrying about product quality, product profit is also the most guaranteed.

strictly speaking, compared with the original parts, the parts produced by other enterprises can all be called sub-factory parts. Because the sub-factory parts have a great derogatory color, it is very unfair to the factory parts and brand parts. Therefore, the sub-factory parts usually refer to the accessories produced by small and micro enterprises or workshop-style factories. Because of the limitation of technology and equipment, most of these sub-factory parts are metal parts and plastic products with low technical content, simple structure and easy processing. However, it can't be said that all the sub-factory parts are fake and shoddy products, and the workmanship of many sub-factory parts is gradually improving. After all, the lower the product is, the lower the profit will be.

in addition, there is a product that is the same as the original factory, which is called off-line parts in the market. Refers to some defective products in the original parts. These products enter the market through some special channels, although the price is 3%-5% lower than the original parts, but since they are defective parts, there may be some risks in use, and the purchase depends mainly on luck!

the difference between original factory parts, brand parts and sub-factory parts

packaging

the packaging of original factory parts mainly reflects some information of its own brand, including the passed certification, product model, address and anti-counterfeiting label. This is also the place where the factory parts manufacturers are confident. Therefore, few genuine factory parts appear "big names" on the packaging and use counterfeit original packaging.

brand parts also have their own characteristics in packaging, which will highlight some information of the enterprise. Therefore, there is a tendency for brand parts to move closer to factory parts. After all, with the benign development of an enterprise, the quality and grade of products will be gradually improved.

the packaging of the sub-factory parts is more casual, and some even use imitation original parts for packaging. And some sub-factory parts simply give up using packaging. Because the profit of auxiliary factory parts is very low, if you can save, you will try your best to save.

workmanship

it goes without saying that the factory parts are exquisite in workmanship. Some factory parts will even be higher than the original parts. Therefore, some original parts are actually purchased original parts, or they will entrust the original parts enterprises to produce original parts.

the workmanship of brand parts is also relatively fine, but after careful observation, there will still be some gaps with the genuine parts. The main reason is that some details of brand parts are omitted from some technological processes, so there will be a slight gap.

the workmanship of the sub-factory parts is somewhat unsatisfactory. The main reason is that the factories that produce sub-factory parts have low-end production equipment and technology, so they can only make some low-end products, so it simply does not reflect how good the sub-factory parts will still be.

Details

The original parts are exquisitely made, which is mainly reflected in the handling of details. For example, an accessory consists of many parts, so the accessories of the factory parts will adopt products with higher standards in the selection of some small parts. To form a near-perfect product.

the details of brand parts will be handled in detail, but there will also be differences compared with the original parts. This difference is mainly due to the different standards of product production, so there are subtle differences in details.

since there are no strict standards for the details of sub-factory parts, the products are more casual. Especially when it comes to some combined parts, the auxiliary factory parts will choose some cheap products. Therefore, the overall use value of the auxiliary factory parts will not be high.

to sum up, due to the special national conditions in China, there are many automobile brands at present, and there is no unified standard and specification for automobile parts, so there will be a situation in which the original factory parts, brand parts and sub-factory parts coexist with each other. Although it can save maintenance costs to a certain extent, many parts are hard to distinguish between true and false, and poor quality parts will cause hidden failures of vehicles, which in fact will increase maintenance costs. Therefore, in this sense, it is urgent to rectify the auto parts market!